Miss Fortune's Blunder-Revolver Pistols
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom design of Miss Fortune's pistols Shock and Awe, rendered as a mix of blunderbuss, flintlock and revolver.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Share Alike
This model was designed by me and a friend cosplaying Miss Fortune. We wanted to create a mix of blunderbuss, flintlock pistol and revolver with an ornate but at the same time modern or hextech-looking feeling. Most of all we did not want the pistols to appear overly bulky, which designs of Miss Fortune's pistols easily do. We were both quite happy with the result :)
The barrel assembly is built around a 12mm diameter round wooden stave, but the print files come with a plastic alternative (the "Barrel Pin") that works just as well as long as it is printed horizontally (like in the .3mf file).
(Optional) For full functionality, two 0.3 x 4 x 10 mm springs (or similar) can be used in the assembly of the chamber, which will allow the trigger and hammer to move. Sets with springs like this can easily be found on Amazon, but if you don't have them, the trigger and hammers can just be glued in place instead.
In the below video I will walk you through the assembly.
The model was designed in Onshape and is available here: https://cad.onshape.com/documents/6492f5cc355487e0de52fe42/w/b040eea3a930a7349c5a2902/e/0888c41b7c056e513f76574c