Counting matching models…
Use this jig to hold the shocks of your 1:8 RC Car while you refill them and let the bubbles rise :-)
Print approx. €7.14–€8.72 excl. taxPreliminary estimate for one variant
A simple, yet curvy, dualshock stand. Includes a slot to route a charging cable. Printed mine in pistachio PETG with 2 perimeters and 25 % gyroid infill, but as its overbuilt it can be made with practically any material and reasonable…
Print approx. €8.67–€10.60 excl. taxPreliminary estimate for PETGSource material: PET
Quick print for an adjustment knob for Manitou Skareb Elite MTB Shocks (circa 2003). Mine broke after many years of service. If anyone else still uses these and also needs to replace the knob, this print may be of use. PETG is fine for my…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Initially designed clip for managing strings of the Outshock reflex ball trainer. The elastic strings easily get entangled, length adjustment and switching between the 2 sizes of balls is not that easy. Great improvement with this simple…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Inspired by a design from Nicholas Piegdon: https://www.youtube.com/watch?v=8qTx_9HK7IM Used 3D scans from: https://bitbuilt.net/forums/index.php?threads/ps2-dual-shock-2-controller-scan.5088/
Basicaly an overengineered PS4 controller stand Derived from a 3D scan - https://www.printables.com/model/125924-sony-dualshock-4-3d-scan/remixes - Thank you I provided a full stand file so the optimised one can be used as a mesh modifier…
2024-FEB-7: Lost track of my files a bit, but uploaded several I had in the mix over the last week… the V2 design is stronger and does not have the flanges on each end. *** Iterated a bunch to get a minimal design that is still strong…
made this for my son to play with come nice together if the 2 disc is printet in propper tolerances ITS A REMIX OF www.thingiverse.com/thing:3882003 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
6x M3x25mm screws are required for assembly. Print inlays and ring seal in TPU . The seal is best printed in 100% infill - concentric. For the inlays, use 2-4 walls and no more than 0.8 mm top surface thickness. Use 5-8% infill for harder…
I've downloaded and printed some nice controller stands for my Xbox (PC) controller and Nintendo Switch Pro controller. However, there wasn't one that matched their design available for the official PS3 controller so I designed one myself…
Dualshock 4 screwed wall mount witch solidedge 2022 files Update May 2026 : Added a V2 that should clear the PS button a little more.
Designed for 0.1mm layer height (0.2mm first layer height is fine). No supports required. Use 1mm thick double-sided tape pieces UPDATE: added BSP D9 version with +0.4mm clearance
I recreated the shock mount that I currently have. It should be good enough to print with supports. I will probably create a 3D printing friendly one that does not need supports. You will also need a elastic band to connect the two…
Ever wish you could attach a mini display to your PS4 gamepad? With 3D printing, you totally can! This 3D printed mount attaches a 7" HDMI 1200x800 display to a Playstation 4 DualShock wireless controller.…
A simple joystick lock for an ps4 controller. The function for this is to be able to put your controller in a bag without getting stick drift.
Behind the axle shock towers for 50mm RC4WD shocks and drift spindles including drill guides for the aluminum drop axle
After some extensive searching, it took a while to find a way to add “attach points” to my backpack to be able add some bungee cord without permanently modifying or damaging the bag. There were no printable models that did quite what I…
These are taller shock towers for the 3Dsets model 14 Max Van, allowing for use of 70mm or 90mm shocks in the front. The original files are from the 3dsets' parts files, I just adjusted the height of the top perch for the shock. I made 2…
I designed this shock mount for the Trx4m. I mainly made these to have more clearance over rocky terrain and to jack it up. They do not only make the car look cool but gives you the articulation you want for crawling! This is a Remix of…
I have bought a desktop microphone mount (or stand) with an universal shock mount (plastic bracket). The diameter of the HyperX Solocast microphone is to wide to fit the inner ring of the shock mount so I have designed a "dummy"…
Lost one of these out on the trails and they are expensive to replace so decided to design and 3d print one!
Shock extensions based on aluminum aftermarket ones. 3 files are included - the specific setup I have for front and rear, and a universal one for more adjustment options. You will need 2x M3x10 screws for each extension, so 8 total if…
The rear suspension of my TT-02 felt far too stiff, even with the Soft springs included with the Tamiya CVAs. These brackets bring the mounting point 7mm inwards. Notes: Designed to be used with Tamiya CVAs (TAM54753) Need 4x 3x12 machine…
Honeycombstoragewall mount for your DualShock 4 Controller. Нexagon radius 6.505mm, slope 1 degree UPD1 in the comments said that the hexagon is too small, I increased all sides by 0.2 mm UPD2 add 30 ° turned hexagon model My printing…
Professional Elastic ShockMount for Neumann U87 Microphones The elastic string you see in the picture can be purchased anywhere they are selling sewing material. As well as you can spend more money to buy the typical gray one. PAY…
Stand for 4 controllers
Test how well a printed bushing can work. Normally a steel tube strenthens the bolt in a wider mounted shock end, in that case one can probably also adjust this design via parameters to be just the spacer. Print Settings Printer: Ok…
Watch stand for Casio G-Shock watches. 4 parts to print. 1 x 8 G Shock Top Plate V2, 2 x G Shock Lean stands, 1 x G Shock Brace. Needs 4 x M5 x 16mm CSK Screws for assembly.
Simple controller stand for the PS4 controller/Dualshock 4.
Wall Mount for a Dualshock 4 (or similar sized) controller. The mounting holes are intended for use with 1.6mm nails, for use with larger nails or screws the holes would have to be expanded. Holes can be widened to ~5mm max without…
Printed in TPU. The side with the silver frame mount might need to have the z height scaled down a little as is slightly smaller (at least in my one). Update: I scaled X & Y to 95% to get a tighter fit on the shackle, over time the tpu…
Simple remix of the Dualshock 4 attachments from @p0tty to go with the backplate from Naten11 The original was too thick, so I slimmed it down to fit perfectly with the backplate. I also made a remix of the orignial backplate without logo…
I've designed these for a simple Ender 3 enclosure I'm building out of 2 Ikea Lack tables. They are very easy to print, they come with 3 small holes to be screwed to the legs of the table. I've printed mine out of Filaticum transparent…
Remix of https://www.printables.com/model/166887-volume-spacer-for-fox-float-shocks for my 2026 Fox Trunnion
Akkuhalter für den Dualshock 4 V1 Controller und einem günstigen Chinaakku mit JST PH2 Anschluss. Hier gibt es verschiedene Versionen der Stecker. Bitte erst nachschauen welcher vorhanden ist. Der Halter wird einfach mit doppelseitigem…
Design Concept: The goal of this project was to create a functional safety device that fully utilizes the properties of flexible filaments like TPU or TPE. Instead of a solid block of rubber, I used a hollow-cell architecture . These…
Meet Karate Crab – the fiercest crustacean on the coast! With clenched claws and a battle-ready stance, this bold little brawler is packed with personality. From his furious expression to his spiraled shell of steel, Karate Crab is always…
Demo This design requires additional hardware! This design must be printed in TPU! Making the Brass Connector This shock mount replaces the plastic mic holder at the end of the PRO 35's provided mounting clip. In order to securely connect…
This adapter allows a standard DualShock 4 phone mount to hold your phone in portrait orientation instead of the usual landscape mode. It was specifically designed for the Dobe PS4 Mount Clamp , as many phone mounts available online…
Shock Machine using Mosquito kill circuit
to put on the pencil to protect it from falls
100% заполнение @Слой 0,12 @Уплотнитель изготовлен из ПА12 (нейлона) или чего-то эластичного. @ПЭТГ рвётся после 10-20 использований .
I bought a cheap ebike. It was an unknown brand, so probably some rebranded chinese ebike. Anyway, the problem was that it was slightly too small for me and I wanted a longer shock absorber. I therefore made this to see if a longer shock…
Background: This is part of a much bigger system design which is detailed here: Mountain Bike Data Logger Update 7-26-2026 : I put a rib on the top strut piece of magnet mount to stiffen vertically. I noticed a 45Hz peak in the…
I lost one of the squishy shock absorbers that came with my Cloud-9 bike saddle, so I printed two replacements in 95A TPU. I used 4 top/bottom layers, 2 walls of 0.68 mm each, and 15% cubic infill, but you can adjust this for the feel you…
model for 270-275mm outer boot(look under your shock) use tpu95a with 1,2mm walls\25% hyroid infill (ok for 75 kg)
This is a clip for rockshox shock pump handle. TO install it, you only need a ziptie to hold it in place.
Universal front shock protector recommend printing in 100% infill
Print at .1 100% infill. in the strongest filament you have. Also from the outside in I printed in Nylon. Good as a temp replacement to keep you driving at least until your replacements arrive etc. If you can put an O ring good, otherwise…
DE Beschreibung: Ein praktischer Helfer zum bauen, reparieren, befüllen und reinigen von RC Stoßdämpfern. Diese verbesserte Version meines Modularen RC Stoßdämpferständers kann schneller gedruckt werden und benötigt weniger Filament und…
Custom-designed strengthened front shock tower for MJX Hyper Go 1/16 scale models. This part is a direct replacement for the stock component and is engineered to fit precisely using the original hardware. Printed in solid with 100% infill…
Use a decent PLA or PETG for this and it should be able to handle reasonably small loads, such as holding lids down or the like. No guarantees as to heavy loads though.
Btw, I made a new, better RC Car: It's available here: This 3D Printed RC car requires some components: https://itkacher.com/pages/3d-printed-rc-car-parts-list-bom
##### Highly Experimental ##### This model is highly inspired by the sotar shock damping system . It works on the same principles. It allows the variant flow rates based on piston position. The model has parameters defined so you can…
Update 11.03.2026 - fixed Right part of the chassis and the rear left arm - there were some incosistancies in between the left and right arms: Update to RUDE - 09.2025 I had some of the non-printed components available in my storage so…
This is a protector for your PS4 controller (i.e., the Dualshock 4). It covers both analogue sticks, all buttons, and also includes a shroud for the triggers. It is kept in place with a simple strap that is printed flat without any…
Demo This design requires additional hardware! This design must be printed in TPU! Making the Brass Connector This shock mount replaces the plastic mic holder at the end of the PRO 35's provided mounting clip. In order to securely connect…
Working on my latest RC build, I realized off-the-shelf suspension shocks were surprisingly affordable. To bridge that gap, I designed these 3D printable adapters for them. Required Products WPL C14 C24 Shock Absorber 4x M2.5x12mm Screws…
MJX 14210 shock connector, I used Flex TPU - 64D Filament. I suggest it for its flex to strength ratio
Meet the 30mm CO₂ Fun Grenade – where creativity meets excitement! Designed to turn engineering into play, this 3D-printed grenade (PLA, or any lightweight material you prefer) is made to look awesome, feel cool in your hands, and deliver…
The original connectors for the shock absorbers all broke causing the drum to bang against the side of the washing machine. I modeled new connectors based on what was left of the old ones. The original connectors were made in 2 pieces and…
Needed something to keep my watch away while working, but still to be able to check the hour every now and then. Got used to this small accessory and my watch lives there when not worn. Also had to change the wristband 2 times since i…
If you run on carpet some tracks require front & rear shock tower protectors. This is to fit on the rear of the CAT PB and attaches with a small cable tie.
Summary This is an adapter so that you can use a NATO strap with your G shock watch. Definitely fits the GW6900, may work with others. The adapter takes a 24mm strap but you could change the model with tinkercad to have it take any size.…
Sakura Front Shock Mount Higher plus 1mm, 2mm and 3mm.. For those who have short shocks (52mm see the picture, i use +3mm mount) and they are weak (even the spring is pre-tensioned at maximum) you can even higher the mount to help it..
This is a thick, heavy-duty protective case designed specifically for the iPhone 17 Pro , using official device dimensions for a precise fit. The case features a reinforced outer shell, strong perimeter bumper, and extra-thick walls to…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Files for the Cycloneshock Break Action Kit and Shotty + Inline Cylinders.…
Created this Shock Piston for my Corally Python. Corally Part number is: C-00180-080 Holes are 6 x 1.3 mm. Used a small drill after printing to create a clear hole with this diameter, but I think it is not really needed if your printer is…
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
If you have a washing machine in a corner, it probably hits the wall while spinning. I have created a simple damper that prevents the washing machine hitting the wall. It is attached with three 10x2mm magnets. It can be removed at any…
I created a replacement Arrma 223S Shock Rod End (ARA330666) for my 1/8 223S Typhon. Looks like this will fit most Arrma 223S and 3S models, but check website for compatibility. I had to modify the original design to be more additive…
A adapter to replace the resin adapter that connects a NATO cloth strap to the body of a GW6900 G-Shock watch. I made this because the other models that I found broke after some time, and I wanted to make a larger version in CAD.…
The rear suspension of my TT-02 felt far too stiff, even with the Soft springs included with the Tamiya CVAs. These brackets bring the mounting point 7mm inwards. Notes: Designed to be used with Tamiya CVAs (TAM54753) Need 4x 3x12 machine…
3D-printed shock mount designed for slim condenser microphones (AKG P170-type / “cigarette” microphones). Uses elastic suspension to reduce vibration and handling noise. Designed around a GoPro-style mount for flexible positioning. Made…
Esta es la versión flexible de mi funda para el Kindle de 4ª generación . Diseñada específicamente para ser impresa en TPU , esta funda ofrece un ajuste tipo "guante", manteniendo el dispositivo ligero y protegido sin añadir volumen…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Hardware Needed for assembly: 8x M3 Heatset inserts ( 94459A130 ) 2x M3x8 Socket Cap Screws ( 91502A103 ) 4x M3x6 Nylon Screws ( 92492A116 ) 6x M3x16 Socket Cap Screws ( 95263A158 ) 1x Screw Switch (…
Robak : 35mm and 70mm cutting jigs to cut 3mm steel rods, differential stand to fill with oil and holder for shocks to fill with oil. ‘bak: 30mm and 55mm cutting jigs to cut 3mm and 5mm steel rods.
System 573 Shockbox This is a shockbox-style case for System 573 CDs and security cartridges, designed after the Amaray-style DVD case format. It provides a durable, unified storage solution for protecting discs and cartridges while…
Solving a bit of a problem with the Sony FX-30 / FX-3 audio handle microphone mount. This mount has two primary issues: 1) It is sized for a very specific 27mm diameter microphone that almost no one uses 2) It is really loud and makes…
I bought a cheap ebike. It was an unknown brand, so probably some rebranded chinese ebike. Anyway, the problem was that it was slightly too small for me and I wanted a longer shock absorber. I therefore made this to see if a longer shock…
Deploy overwhelming firepower with this Elite Power Armour Shock Trooper . Encased in bulky, battle-scarred powered armour, this futuristic soldier grips a heavy assault rifle designed for frontline dominance. The reinforced shoulder…
Rule through fear and conquest with the Warlord of the Skull Throne . Seated upon a brutal throne forged from blades and piled skulls, this grimdark conqueror radiates dominance. Armoured in heavy gothic plate and gripping a longsword…
Heyhooo This is a shock absorber I designed for the Petromax LM500 . https://www.youtube.com/shorts/hlhutxKBYMc The Problem Quite soft impacts from the direction of the battery axes are enough to temporarily disconnect the power supply.…
Shock absorber for washing machine meant to be printed in TPU V1 - Normal model V2 - Less material needed same strenght
This case was designed for a stroke patient who had reduced hand grip strength and dexterity. Most phone cases are designed with smooth, rounded edges (making them slippery) and minimized buttons to prevent accidental activation. This…
A simple, friction type shock absorber for 1:10 scale RC buggies such as The Marmot and others. Use a M5 allen head bolt for stem. Also requires a metal spring to be used.
XRAY XB2 2026 Shock Tower Cover Modeled on the 6-dot tower. If using pliant material, this will work on the 4-dot as well (just bend it a little) If using rigid material like PPA-CF, this will only fit the 6-dot. The attached 3mf file…
Shock guards printed for the Hpi Wr8. These are printed in PCTG, but pla is properly fine. Note if you have the Original shocks then choose model named "original shock end". Original diameter is 6mm, and my no name shocks have 5.6mm shock…
This wall protector is optimized for TPU to ensure a clean, support-free print that actually works. The "wave" geometry acts as a mechanical spring, absorbing the initial impact and distributing the force across the entire part when…
I needed a replacement rear shock because it started leaking and while I was waiting for the service kit I made myself this hard shock absorber. It needs to be printed with more infill and thick walls to be strong. I printed with PETG. It…
Always check where the notch is on the rail and try to match it with the bump inside the accessory. PRINT WITH BRIM IF PRINTING VERTICALLY
Use TPU to print this Shock-absorbing foot for all your DIY needs... I recomend using any Openbuilds M5 Low-profile screw. You can optionaly also use a washer on the outside if mouning on a sloted profile. I printed with Ninjaflex 85A
