1 / 3
Arrma 223S Shock Rod End (ARA330666) — image 1
1 / 3

Arrma 223S Shock Rod End (ARA330666)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Shock rod end fits most Arrma 223S and 3S model shocks.

Rating
0 / 5
Likes
6
Downloads
42
Makes
0
Views
201
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I created a replacement Arrma 223S Shock Rod End (ARA330666) for my 1/8 223S Typhon. Looks like this will fit most Arrma 223S and 3S models, but check website for compatibility. I had to modify the original design to be more additive friendly, which should not impact function. Print with flat side facing down. I printed in Prusament PC Blend, but PETG is probably ok as well. I would not recommend PLA. Additional print settings below.

***Update 4/17/2026. I had the threaded rod pull out of the 3D printed shock rod end on a hard landing. I reduced the hole diameter to get better thread engagement. No problems with the new design so far. Please ensure that you are using the V2 STL! 

Supports: Support on Build Plate Only

Layer Height: .15mm Structural

Perimeters: 3

Tags