1 / 3
Bosch PEX300 PEX400 vacuum adapter to 50mm PVC glue sleeve — zdjęcie 1
1 / 3

Bosch PEX300 PEX400 vacuum adapter to 50mm PVC glue sleeve

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed this adapter with the 15 degree bend to end in a 50mm PVC glue sleeve compatible end.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Before I owned a 3D printer printer I made my DIY shopvac with cyclone with PVC piping and most machines now have a 50mm port on it.

I remixed this one so that it will fit the same. Its a thight friction fit on the on GEX 400AE as per original. The fit for the vacuum hose can be tweaked with some tape if needed (not in my case)

Printed mine standing up, 50mm side on the bed. With prusament PETG lipstick red. 0.20mm structural profile.

Tagi