Prusa mk2.5S improved Y carriage GT2 Belt Holder with lock in nuts for bed leveling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved Prusa mk2.5S Y carriage Belt Holder with nut holders for bed leveling with silicon spacers.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
On doing a complete rebuild on my mk2.5S I created an improved version for better alignment and with lock in nuts for adjustable bed leveling using the silicone spacers, found the original a bit weak on Z layers when printing in polycarbonate carbon fibre had a bit break off as PC not so forgiving as PETG, so while also upping temperature for better Z adhesion with PC , thought to reengineer less fragile and more robust block, while keeping the restraints of the original footprint and improving the alignment with both the stepper motor and Idler tensioner, which in turn means there is better contact with the drive gear and less chance of any slipping also smoother being less lateral forces on the bearings and reducing vfa's in prints.
Tested with some gates GT2 6mm belt to ensure it was tight interlock .
Versions :
27.07.26 V4.2 Functional version published currently using this one myself.
Printing :
3 or 4 perimeters 30% Gyroid infill
PETG , ASA , PC what ever suits your running conditions , I use mine in a heated enclosure so printed in PC carbon fibre .
Updates :
none needed yet.
Let me know what you think.
cheers.
