Redirector for Centauri Carbon Heater Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redirect the hot air coming out of your CC Chamber Heater.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I printed https://www.printables.com/model/1320401-centauri-carbon-heated-chamber-mod to add active heating to my CC chamber. I found the hot air goes pretty straight out of the heater making it take longer for the heat to get to where the model would be. It could also introduce a lot of heat directly to rods, belts, etc. I wanted to redirect that heat towards the middle of the chamber to point it more towards the build area, so I designed this model. It slides directly onto the heater, just like the magnetic mount mod I referenced. I would recommend printing this in Polymaker/Fiberon PA-GF25 and PPS-CF10 or another material with high heat resistance.
I also have the Inventor Part file which if you want to modify the model.