Redirector for Centauri Carbon Heater Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Redirect the hot air coming out of your CC Chamber Heater.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I printed https://www.printables.com/model/1320401-centauri-carbon-heated-chamber-mod to add active heating to my CC chamber. I found the hot air goes pretty straight out of the heater making it take longer for the heat to get to where the model would be. It could also introduce a lot of heat directly to rods, belts, etc. I wanted to redirect that heat towards the middle of the chamber to point it more towards the build area, so I designed this model. It slides directly onto the heater, just like the magnetic mount mod I referenced. I would recommend printing this in Polymaker/Fiberon PA-GF25 and PPS-CF10 or another material with high heat resistance.
I also have the Inventor Part file which if you want to modify the model.