1 / 17
Duck Burner - Easy Maintenance with bambu X1C / P1 / P1S hot end LGX Lite tool head double switch and crossbow cutter adapters — zdjęcie 1
1 / 17

Duck Burner - Easy Maintenance with bambu X1C / P1 / P1S hot end LGX Lite tool head double switch and crossbow cutter adapters

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easier to swap a Bambu X1/P1 hot ends than the dragon burner. Dual filament switches if you use the trifecta

Ocena
0 / 5
Polubienia
11
Pobrania
20
Wydruki
0
Wyświetlenia
676
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Timid, but focused. Takes the hot end like a duck to water. 

2026-09-20 V1.14  Shortened the spacer and tightened up the package.  I took out the Trident gantry files, this duck went down a rabbit hole.   

2026-09-18 V1.11 Updated with a full LGX-Lite double switch re-case and a crossbow cutter base.

LGX-Lite extruder inlet switch
LGX-Lite extruder outlet switch (

)
LGX-Lite Crossbow adapter plate
Lengthened strain relief for the EBB36

2026-09-01 New style extruder adapter uploaded as a separate STEP.  I built one with 4mm tall inserts instead of 6mm and it loosened.   This style should clamp firmer. Has a floating section that clamps onto the hot end.  

2026-08-27 Update added hot end adapter with cable management. 83 print hours. 
Note:  the diffuser was changed to this one:  

The parts in the STEP file are the generic, I highly recommend this one! 



2026-08-26 Update 1.0 
Tested for over 30 hour on the V0.  Works well.  Added wire paths and large tunnels so you can route your wiring without taking everything off.  Still untested on the Voron Trident/2.4 gantry. 


2026-08-13 Update: 0.9.10
Changes made to the normal offset cnc cartographer spacer. 
The extruder adapter plate was modified for 4 screw attachment.
left fan wire through hole changed
All files in the step assembly, they have not been moved into the 3mf  yet.

2026-08-09 Update: 0.9.9
CNC Cartographer mount finalized. Two versions. Untested.
Many cowl printability updates including modeled in support with only one body. Break off.
All files have some sort of change.
                        
2026-07-30 Update - rough draft of Trident/2.4 +CNC_Cartographer compatible mount. Kind of compatible, you must cut down the lower stand offs.


The idea here is to be able to easily swap the hot end unlike the Dragon burner that needs to be fully torn down.  The cowl can be taken off with the two front bolts since they bolt to the hot end adapter.  The hot end and fan stay attached so you can perform maintenance without worrying about heat creep.  

This is not fully compatible with the dragon burner I just used it as a starting point. You could certainly modify the extruder and hot end adapters to fit what you have, but the cowl will also need some work since I made it a tight fit to direct airflow.

This hot end requires a 2510 fan. There is only one 24v fan that I know of and it flows a ton of air.  BERSERKER VINDR Ultra-Performance 2510 Axial Fan 24V.  I cannot confirm any other fan works, this is the one I used.  I run it at 100% power and it works great.  60% did not work out. No other power settings tested.

The unconventional double screw inline mounting of the extruder adapter is a provision for bolting it on directly to a Cartographer CNC mount.  With the cartographer adapter, the duck burner can be mounted with the V0 mounting holes and the cartographer mounting holes. 
* The normal mount keeps the nozzle position exactly same as the stealth burner and you can use the offsets in the Cartographer CNC documentation.
* The SHORT mount will move back your hot end 1.75mm so you have the ability to gain travel if you want to go down that rabbit hole. 

V0.9.9 - this is a pre-release. 
Added three solid models to print in order to use on a Trident/2.4 carriage with the CNC cartographer mount. No testing or fitting done yet on the full size voron.  You are jumping into un-paddled waters.  

Features and notes.

1 - Clearance for V0.  Cowl has been cut back to clear the V0 Z rails.  You can extend your Z  7mm at least.  I am running 127mm of z travel. 
2 - Bambu compatibility - X1 or P1 hot ends.
3 - pull through m3 inserts - put the inserts in so they pull through, not push into the material.  There are two tricky ones on the face of the hotend mount.  See the pictures for a simple way to get them in straight.
4 - assembly requires button head screws or else you wont be able to slip a hex key through the M3 hole to tighten the hot end adapter onto the Trident carriage.  You must use a 2mm hex to get through.   The screws must not exceed 10mm in length.  8mm to 10mm bhs should work. ( bolts not needed if mounting to a V0 carriage)
5 - there are two bosses up front to attach the fans, these are optional and not needed when using the cartographer mount since they are captive. 

If you are tired of not being able to swap nozzles easily and are not afraid of some teething problems, have a go at it.     Please include STEP files if you remix.

Requires:

2x 20mm SHCS or BHCS (V0 tool carriage )

2x M3 8mm BHCS (extruder adapter to LGX-L)
2x M3 14mm BHCS(hot end adapter to extruder adapter)
2x M3 12mm  (cowl to hot end adapter)
2x M3 25mm SHCS (X1/P1 hot end to hot end adapter)

4x M3 4mm high heat set inserts
2x M3 4mm or 6mm high heat set inserts

---

To mount on a full sized Voron with a CNC Cartographer mount:
print the rear CNC Cartographer adapter and insert heat sets to the top two mounts. 
attach to the cartographer with 4x M2 screws. 

***If using the NORMAL mount cut off 3.0 mm off the bottom legs for a flush seat to the fans.
**If using the short mount cut off 4.75mm off the bottom legs for a flush seat to the fans.

A cartographer model with one short leg has been provided so  you can see what needs to be done.
The Top also needs to be cut down for extruder clearance.  There is no going back if you go this far! 

Note I have not tested this on my trident yet. 

The LGX-Lite double switch and crossbow adapters have been added! The rabbit hole has deepened. 

Tagi