Liczymy pasujące modele…
For various reasons I wanted to replace the stock 2510 fan of my KE's hotend with a larger and more effective 3010 fan - keeping the original hotend shroud/cover as is. K1 and K1Max hotends have 3010 fans whereas KE has a smaller 2510…
Housing to replace the original housing of the qidi Xmas 3 printer, Classic model with additional geometry and holes for improved cooling. New front and rear models with current geometry. Front without logo, with logo, and logo to be…
UPDATES This is a compact and lightweight hotend fan bracket for the Qidi Q2. The brackets have ducts on them to help guide the air where it needs to go. There is two version available, one is for the stock 2510 fan that comes on the…
Easy to print, no print support Fan clip for 2510 fan M2.5x14 or M2.5x16 screws Fits v6 hotend and all derivative Not actually tested in practice regarding cooling capability, may want to consider installing it at a slightly lower point…
Inspired by model https://www.printables.com/model/815063-ender-3-v3-ke-2510-to-3010-fan-adapter I designed a new model that secures the heatsink using four M2 screws, ensuring a stronger bond. Additionally, I included 4mm holes…
Mount for adding a 2510 fan onto the back of an LDO Nitehawk36. This uses the holes in the PCB (Rev C. version 1.4) so it should work for any Nitehawk mount you choose. Work in progress, but fully functional. Things to know: You do not…
My Ender 3 V3 KE hotend fan caused a lot of vibration and made the whole gantry resonate. When I bought a new original replacement part, I realized that all these fans have the same issue: causing a lot of vibration. The only way to…
QIDI Xplus New Front head casing with fan2510
The design is lower compared to the original, still maintains functionality and good cooling air passage.
3pin connector for example for PC fan if you missing wall after slicing, set wall generator to “Arachne” tested in PC motherboard and fan adapter printed on bambu A1, 0.16mm High Quality profile, generic pla profile. Elegoo PLA filament
add fan to cool down the heat sink . work well for me. for fan can look for round micro cooling fan 25.5mm x 10mm my region i am using shopee, it ship from china to malaysia. few ringgit only. please refer this link for my other model.…
need 1 pcs of M3 8mm screw. the fan bracket can adjust, when lock and unlock the extruder.
Just a quick and dirty adapter to convert the 2510 mounting to 3010. This is mostly intended as temporary solution while you wait for a 2510 fan to come in the mail, as I do not have them on hand readily as none of my other printers use…
Wanted a pi4 fan that was tall enough for a heat sink and used 2510 fans (it's what i had). Also added holes for 3010. This is meant to be used with the voron back plates that use M2 self tapping screws. I included a tall and short…
It is a fan duct designed to use with 2510 fan.
Replacement front plastic logos for Wurlitzer 2504 and Wurlitzer 2510 jukebox. Notes: For the "press a letter and number" piece, print letters up with supports in the center, then change filament when you get to the letters. For the…
A minimalist stand for the Philips OneBlade (QP2510). Keep your shaver tidy and upright. Easy, support-free print
Couldn't find a cb1 25mm fan mount so here it is.
Description This is a remix of the popular XolPAP mount for the Dragon (SF/HF) hotend. The only modification made is adapting the heatsink fan mount to use a 30x10mm (3010) fan instead of the original 25x10mm (2510) model. The goal is to…
Finally got my hands on a Goliath hotend, but soon after I realized that: - original M2.5x5.5 bolts are soft as and the hex slot stripped super easily and I could not get them out from the original printed part anyways, so I just had…
Ayyooo, so I made this to fix a fan that broke right where the motor holds onto it. So i designed a new one! All you have to do is make sure you have some sort of CA glue or something to glue the motor in the center of it. Thats all! If…
The CB2 doesn't get terribly hot, but if you want to mount a small fan onto it, here is your part. I recommend PETG at a minimum but ABS or PC if you have it. There are two models - one for a 2510 and the other for a 3010. These can be…
Box for SKR 3 for sermoon D1 printer, box height 40mm, two side openings for fans 2510.
MUTTER TILL CALIX INTAGSKABEL / MUTTER FOR CALIX INLET CABLE MK 0.5 (0.5m), Art.nr: 1762505 MK 0.8 (0.8m), Art.nr: 1762508 MK 1.0 (1.0m), Art.nr: 1762510 MK 1.2 (1.2m), Art.nr: 1762512 MK 1.5 (1.5m), Art.nr: 1762515 MK 2.0 (2.0m), Art.nr:…
There are two models here, one is a stock toolhead cover but modded to include a 2510 fan to cool the front PCB The second is my version of toolhead for a 4020 nozzle heatbreak cooling fan that also has a 2510 cooling fan option for the…
This is a remix of @MicceB ’s HCW-P715 12/24V to 5V USB Buck Converter Case . The original design included options for a 3010 fan lid or a solid lid. 🔧 Changes in this remix: Modified the lid to fit a 2510 fan (smaller and quieter…
Do you like punishing yourself with hacks and mods to get things to do what you want like me ???? Wish you woulda just got those Fatshark Scouts when you had the change......NAWWWW.... So I had gotten some Fatshark Transformers that had a…
Remix to make the holes smaller.
Adapter to mount dual 25x10mm cooling fans to 40mm. This directs more air to the heat break, greatly improving cooling.
2510 fans can mount to 3010 locations In many cases high performance 2510 fans can create higher static pressure than cheap 3010 fans (e.g. Delta ASB02505SHA-AY6B @15k, West3D Berserker @20k). Hardware: 4x M3x6mm: mounts 2510 through back…
I installed 2 U.2 disks to my tower PC case, which do not have very proper HDD cooling for the 2.5" mounts. So I added this fan duct to the disks. As my PC case is designed to fit 2x2.5" or 1x3.5" at the same location, I designed this…
This is a simple monut to hold the IR remote for the above LED strip controller. I have mounted it on my Delta printer. Without mount, I will loose the remote within milliseconds! ;) Print Settings Printer Brand: Creality Printer: Ender 3…
Check Vzbot discord for my cnc mounting adapter for the Rapido X. Printing: As usual, print this with ABS, PC, or Nylon, something heat resistant. It will needs m3 x 4.2ID x 5mm depth heatset inserts, or you can remix the STEP file and…
Purpose: A simple stand to hold a 2510 fan. The stand can also be used to hold the fan while in use but this type of fan is usually not used in the open air or to suck fumes and other bad gas away. Print settings: Print with any layer…
I mistakenly ordered 2510 fans instead of 3010 fans for my MedusaHC. After super-gluing the first one, I made this in Fusion. It just pops into the bottom of the hotend and retains itself with a friction fit. No hardware needed.
It's being used in a custom modded SV08 AWD enclosed printer. Gemini Ai used to make the script then Fusion moved the 1 and 0's about and got this little beauty. I use standoffs to mount it on the existing holes. Can't show it working…
2510 fans can mount to 3010 locations In many cases high performance 2510 fans can create higher static pressure than cheap 3010 fans (e.g. Delta ASB02505SHA-AY6B @15k, West3D Berserker @20k). Hardware: 4x M3x6mm: mounts 2510 through back…
