LDO Nitehawk36 2510 fan mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2510 fanmount for the LDO Nitehawk36
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 148
- Wydruki
- 2
- Wyświetlenia
- 509
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount for adding a 2510 fan onto the back of an LDO Nitehawk36. This uses the holes in the PCB (Rev C. version 1.4) so it should work for any Nitehawk mount you choose.
Work in progress, but fully functional.
Things to know:
You do not have full access to all the ports, you will need to plug in the connectors before mounting the fanmount. I am unsure if you can plugin the USB port, if anyone tries, please let me know!
This does not take a lot of space, but its good to check clearance at the back of the toolhead at Y max.
You will need two longer M3 bolts for mounting, and 4 M2.5 bolts for mounting the 2510 fan.
For powering the fan you have two options:
Option 1:
Splice in the fan with the Hotend cooling fan, this way the fan only comes on when the hotend is heating.
Option2:
There is an always-On 24v Aux port on the Nitehawk, you will need to solder a connector onto the board for that. I did not opt for this as the fan would be on whenever the printer is powered. But it is also an option.
