P
Printablessven494
LDO Nitehawk USB Adapter DIN Mount
Mount a Nitehawk USB adapter on a Din rail to mount it. 5 insertnuts D4.6 are required
- Pobrania
- 475
- Polubienia
- 39
- Ocena
- 5
Wyniki wyszukiwania: nitehawk
Liczymy pasujące modele…
P
PrintablesCraig Jr Easter
LDO Nitehawk Umbilical Clips for Stealthchanger, Tapchanger, etc
I designed and use these for my Nitehawk-SB based Stealthchanger build. Print from ABS/ASA or other high temp/strength materials. Uses two 2mm wide zipties for indirect tensioning. Allows for two 1mm lengths of piano wire to run through…
- Pobrania
- 341
- Polubienia
- 67
- Ocena
- 5
P
PrintablesIconic FAB
Galileo 2 + LDO Nitehawk SB USB cable strain relief / cable gland
About Galileo 2 + LDO Nitehawk SB USB cable strain relief / cable gland Not a biggest fan of PG-7 cable glands (like me) and willing to make safe and secure LDO Nitehawk-SB USB cable strain relief using Galileo 2 Extruder ? This one is…
- Pobrania
- 305
- Polubienia
- 65
- Ocena
- 5
P
PrintablesViper Worx
Nitehawk36 Mount for G2SA/Orbiter 2 with Strain Relief
Just a quick modification of an existing design to add extra length on the strain relief to enable it to be used for the Nitehawk36
- Pobrania
- 280
- Polubienia
- 29
- Ocena
- 5
P
PrintablesDarryl | lowprokb.ca
Nitehawk 36 Toolhead Board mount (XOL Carriage, WWG2 Extruder)
This was modeled directly from the Rev C (v1.4) Nighthawk 36 CAD, and adds a couple features above and beyond what other offerings currently have. There are wire management hooks to hold wires in place. Zip ties can be used around the…
- Pobrania
- 247
- Polubienia
- 42
- Ocena
- 5
P
PrintablesTwoTwoEleven
Clockwork 2 / LDO Nitehawk SB cover with 4010 fan mount
The RP2040 chip of the LDO Nitehawk SB toolhead board gets very hot with an enclosed chamber and is also mounted on the back side of the board facing the extruder motor which adds to its heat exposure. For a 55C+ chamber temperature I was…
- Pobrania
- 215
- Polubienia
- 33
- Ocena
- 5
P
Printablesrandom.ae
Nitehawk-36 USB Adapter Mount for Voron DIN Clip
Requires one din clip available here: https://github.com/VoronDesign/Voron-Parts/blob/main/DIN_Mounts/din_clip.stl Requires 2 M2x10 self-tapping screws for securing the mount to the din clip. Requires 3 M3 screws for securing the USB…
- Pobrania
- 214
- Polubienia
- 17
- Ocena
- 5
P
PrintablesJarhead
EBB36/SHT-36/Nitehawk Toolhead PCB PUG Mount
You will need 2x M3 heatset inserts for the PUG mount. Currently only have an LGX Lite, Sherpa Mini, and an Orbiter 2 mount but I can make more later in my free time. 2025-07-17: Added VZHextrudort High Mount and WW BMG
- Pobrania
- 200
- Polubienia
- 24
- Ocena
- 5
P
PrintablesArteus Designs
WWBMG Nitehawk-36/EBB36 Inline Anchor Mount
WWBMG toolhead PCB mounts seem to be uncommon, and even moreso when you want the umbilical anchor to be inline with the bowden tube / central axis of the toolhead. This toolhead PCB mount takes care of that. Note: The relief is apparently…
- Pobrania
- 187
- Polubienia
- 27
- Ocena
- 4,8
P
Printablesiamnotahippie
Nitehawk 36 mount for Xol toolhead with Sherpa Mini extruder and PUG strain relief
A chopped-up and slapped-together remix of @Esoterical_306854's excellent remix of @therick's mount. Requires 2 3x4x5mm heatset inserts. Print in the default orientation using standard Voron print settings.
- Pobrania
- 178
- Polubienia
- 30
- Ocena
- 5
P
PrintablesDennis
NiteHawk 36 LDO USB Adapter + Fan mount
The fan mount is designed to fit Orbiter 2 NH36 Mount https://github.com/jontek2/Voron-mods/blob/main/NH36-mount/STL/NH36%20mount.stl holes for the fan mount are 3mm, tight enough for fixing 4 screws. For the USB adapter case, only print…
- Pobrania
- 175
- Polubienia
- 26
- Ocena
- 0
P
PrintablesRavn
Nitehawk 36 Rev 1.4 mount for Wristwatch G2 extruder
Changed to fit the Rev 1.4 of the LDO Nitehawk 36 toolhead board. All Credit goes to Hartk for original design.
- Pobrania
- 167
- Polubienia
- 26
- Ocena
- 0
P
PrintablesMakerMylo
LDO Orbiter2 / Sherpa Mini Nitehawk36 Mount with Standoffs for NH36
Just a simple model made from scratch, Includes 2x 18mm Stand offs Includes 1.5mm ‘nubbins’ to prevent shorting. Requires - 6x Brass inserts (including standoffs) or 2 if using without. - 2x M3x6 Countersunk/FHCS Screws - 2x M3x6 BH/SHCS…
- Pobrania
- 166
- Polubienia
- 17
- Ocena
- 0
P
PrintablesF3D-Labs
Nitehawk-36 Mount for Sherpa Mini with optional 3010 Fan Mount
As i needed a mount for my Nitehawk-36 and didnt find a version to fit my requirements, i remodeled the mount from the Xol Toolhead assembly to fit to my toolhead Update 15/04/2025: - edited the standoffs for better clearance on the board…
- Pobrania
- 160
- Polubienia
- 12
- Ocena
- 5
P
PrintablesRevenant3D
LDO Nitehawk 36 Mount w/ Strain Relief (Sharkfin)
I remixed this EBB36 mount to extend the strain relief to work for the Nitehawk 36 wiring harness. It just needed another 15mm of height to account of the wiring harness.
- Pobrania
- 154
- Polubienia
- 10
- Ocena
- 5
P
PrintablesLGraak
Stealthbuner Galileo 2 Cable Cover for LDO Nitehawk-SB
Cable and board cover, for the Galileo 2 extruder for the Nitehawk - SB.
- Pobrania
- 150
- Polubienia
- 24
- Ocena
- 0
P
PrintablesPepijn van Vliet
LDO Nitehawk36 2510 fan mount
Mount for adding a 2510 fan onto the back of an LDO Nitehawk36. This uses the holes in the PCB (Rev C. version 1.4) so it should work for any Nitehawk mount you choose. Work in progress, but fully functional. Things to know: You do not…
- Pobrania
- 148
- Polubienia
- 20
- Ocena
- 0
P
Printablesfish_taco_pirate
WWG2 Nitehawk-36 Mount
I didn't like how bulky the available mounts for the NH-36/WWG2 were, so I made my own. This model is a split design so that features can more easily be printed on both sides. The cord grip is PG-7 threaded. Print 1x g2_mount and 1x…
- Pobrania
- 140
- Polubienia
- 33
- Ocena
- 5
P
PrintablesAndysTechLab
Nitehawk 36 USB Adapter 2020 Mount
Nitehawk 36 USB Adapter Mount for a 2020 aluminum extrusion. There is a straight and a side version - choose what fits best for you. BOM: 2x m3x6 bolts 2x m3 t nut
- Pobrania
- 135
- Polubienia
- 11
- Ocena
- 0
P
PrintablesIconic FAB
Nitehawk-SB Cable Saver
About LDO Nitehawk-SB Cable Saver Better safe than sorry, these tool heads move pretty fast. This mod will probably allow Nitehwak's USB cable to last longer. This model compliments with Galileo 2 + LDO Nitehawk SB USB cable strain relief…
- Pobrania
- 134
- Polubienia
- 28
- Ocena
- 4
P
Printablesbaconcraze
LDO Nitehawk USB Adapter 2020 Mount
I mounted this on the rear 2020 extrusion right next to the cable cutout for the Z drag chain. Additional parts: 3X Voron BOM M3 Heatset inserts 3X M3x8mm Screws 2X M5x8mm BHCS 2X M5 Roll in T-Nuts
- Pobrania
- 133
- Polubienia
- 18
- Ocena
- 5
P
PrintablesRich Quackenbush
LDO Nitehawk-SB Adapter Mount
I printed this with the Voron settings in ABS: https://docs.ldomotors.com/en/Toolboard/nitehawk-sb This went in a Switchwire build (actually an Enderwire build) but might be useful in other applications.
- Pobrania
- 132
- Polubienia
- 20
- Ocena
- 5
P
PrintablesGreathouse
LDO nitehawk ptfe with spring steel umbilical
Removed the spring steel wire for flat spring steel
- Pobrania
- 122
- Polubienia
- 16
- Ocena
- 0
P
PrintablesRED
LDO Nitehawk Umbilical Clip
Modified the LDO Nitehawk Umbilical Clip to use 3mm wide by 1 zip tie.
- Pobrania
- 112
- Polubienia
- 18
- Ocena
- 0
P
PrintablesEnderman Prints
Voron Clockwork2 Cable Cover with ventholes for LDO Nitehawk PCB
Stealthburner PCB is in quite hot conditions and some airflow is good for cooling. Did not want to add additional fan and existing remakes are fully perforated. Thought that less is more here also…
- Pobrania
- 108
- Polubienia
- 12
- Ocena
- 5
P
Printablesblaket
V0 Nitehawk Mount
LDO Nitehawk 36 mount with low clearance umbilical support. PCB mount is a remix of Chirpy2605's Dragonburner / Sharkfin PCB 36. Frame plate with built in PUG mount and notch for chamber therm wires. I used a 6mm ID medium length PUG.…
- Pobrania
- 105
- Polubienia
- 26
- Ocena
- 5
P
Printablesmeltdown
Voron Stealthburner Nitehawk SB Misalignment Protector - REMIX
This is a very small and fast print. The source is included if you need to change a tolerance. The Nitehawk fan board is nearly identical to the regular HartK Stealthburner fan board save for the gender change of the header pins from male…
- Pobrania
- 95
- Polubienia
- 12
- Ocena
- 5
P
Printablesmkeveney
Eva 3 mods: Beacon mount for Trihorn, alternate 4028 fan shroud, Nitehawk36 mount
8/14/2024 I just finished upgrading my RatRig, and have made a few EVA 3 modifications. It was designed in the following Onshape document, which was copied from the EVA page. I've also copied the mesh files to Github, Thingiverse, and…
- Pobrania
- 95
- Polubienia
- 9
- Ocena
- 4
P
Printablesnoble69
Voron 0.2 - Nitehawk 36 Rev 1.4 Mount for Dragon Burner and Sherpa Mini - VERSION 2
Uses standard Voron settings and heat set inserts. Supports and overhangs print better with 0.15 layer height and sloooow speed.
- Pobrania
- 94
- Polubienia
- 15
- Ocena
- 0
P
Printablesshremi
WWBMG Nitehawk 36 / XOL carriage mount
WWBMG mount to use with the updated revision of the NHK36 and XOL CNC carriage.
- Pobrania
- 93
- Polubienia
- 7
- Ocena
- 0
P
PrintablesHerculez3D
LDO Nitehawk36 Mount for XOL Toolhead W/ Sherpa Mini including Cover and Cooling Fan
BOM: 2510 Axial Fan M2.5x16 BHCS (x4) M3x30 BHCS (x2) Short Length of PTFE Tube Zipties Notes: All Parts are orientated for printing and do not require any supports Hartk1213's original PTFE Ziptie Clip and Fan Cover are interchangeable…
- Pobrania
- 92
- Polubienia
- 11
- Ocena
- 0
P
Printablesron
Stealthburner for a Nitehawk-SB and an LGX
Maturity: Very Good 5 prototypes. In use since 2024/10. A mounting to combine: Stealthburner LGX (not to be mistaken to the unsupported later LGX lite) Nitehawk-SB (and its fan PCB) Umbilical I would call it Casimodo due to its bump. I…
- Pobrania
- 91
- Polubienia
- 14
- Ocena
- 4,67
P
PrintablesSynyster1911
Nitehawk-36 WWG2 mount
This is a remix of one of the WWG2 mounts that removes some features I didn't want to use and added a small section on the side to secure the cable too. This takes stress off of the connector since the wires have a few centimeters between…
- Pobrania
- 88
- Polubienia
- 25
- Ocena
- 0
P
PrintablesCraig Jr Easter
LDO Nitehawk Umbilical Exhaust Plate for Voron 2.4 - 2 Toolheads
This is a replacement exhaust plate for the Voron 2.4 intended to allow umbilicals to pass into the print chamber. Print from ABS/ASA. Requires modification to rear enclosure panel, three M3 heat set fittings, and three M3x8 SHCS.…
- Pobrania
- 87
- Polubienia
- 11
- Ocena
- 5
P
PrintablesNeptunus0001
LDO Nitehawk-36 (NH36) Toolboard Orbiter v2 A4T toolhead mount
LDO Nitehawk-36 (NH36) Toolboard Orbiter v2 A4T toolhead mount Mount for installing a LDO Nitehawk-36 (NH36) toolhead board on an A4T toolhead using an Orbiter v2 / v2.5 extruder. Including bottom mounting slot for Xol-carriage.…
- Pobrania
- 84
- Polubienia
- 8
- Ocena
- 4
P
Printablesonsimon
LDO Nitehawk USB adapter board STEP model
I couldn't find a CAD STEP model for the LDO Nitehawk USB adapter PCB board so I made one based on LDO's published mount for the board. The outer PCB dimensions and holes are placed exactly to scale, while components on the board are…
- Pobrania
- 84
- Polubienia
- 11
- Ocena
- 0
P
PrintablesAero
Nitehawk-36 Toolboard Cover (StealthChanger)
Removed fan grills for better layer adhesion as original model kept breaking with ABS. Added StealthChanger Logo. I used 2 M3x25 screws but all 4 holes are available to be used for various mounting.
- Pobrania
- 80
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJR
LDO Nitehawk PCB Mount
An alternative bottom part for mounting to extrusion with two M5 BHCS screws and t-nuts. It's intended to be used with the top part from the LDO’s USB Mount Adapter design. Here's a link to LDO’s USB Mount Adapter STLs:…
- Pobrania
- 79
- Polubienia
- 13
- Ocena
- 0
P
PrintablesDood
Anthead WWG2 Extruder Nitehawk PCB mount for Stealth Changer
This is a modified version of TheSin's PCB36 mount for Steath Changer and the Nitehawk36 toolboard PCB, for use with a modified version of the Stealth Changer backplate I removed the extra holes, and shifted the extruder mounting holes,…
- Pobrania
- 77
- Polubienia
- 10
- Ocena
- 5
P
PrintablesKinnlbim
Nitehawk 36 / EBB36 - 3010 Fan
Extended the rear part for 3,6mm to fit an 3010 Fan properly, without bending.
- Pobrania
- 72
- Polubienia
- 11
- Ocena
- 0
P
PrintablesNinefifty
Voron v0.2 frame cover Nitehawk-36 USB + WAGO mount
Recently switched from the original ldo picobilical to the Nitehawk-36 USB toolhead on my Voron v0.2. Now with a step down buck converter added to power the Raspberry Pi there was no more need for the picobilical pcb frame cover, so i…
- Pobrania
- 70
- Polubienia
- 15
- Ocena
- 5
P
PrintablesRED
Stealthburner for a Nitehawk-SB and an LGX Lite V2 / Pro
This is for the Bondtech LGX Lite PRO eXtruder and should work with Bondtech LGX Lite V2. I combined the Stealthburner for a Nitehawk-SB and an LGX by Ron and the BondtechAB Voron model to create the correct fit. I spliced it together in…
- Pobrania
- 68
- Polubienia
- 4
- Ocena
- 5
P
PrintablesJohn Doe
WWBMG Nitehawk-36/EBB36 Inline Anchor Mount - shorter relief remix
The original model had a very long relief which caused rubbing the top panel on my trident.
- Pobrania
- 66
- Polubienia
- 6
- Ocena
- 0
P
PrintablesArkelic
Nitehawk 36 LGX Lite Pro Mount
This is a mount for a LDO Nitehawk 36 Rev C 1.4 toolhead board to a Bondtech LGX Lite Pro extruder. The new NH36s come with a chunky overmolded cable that needs some support. The two mounting holes at the bottom are for a Stormbreaker…
- Pobrania
- 65
- Polubienia
- 2
- Ocena
- 0
P
Printablessurefir3 wilson
Filametrix Stealthburner G2E Nitehawk36
I liked hartk's strain relief mount for the reaper and wanted to splice it together with this umbilical mount for the StealthBurner G2E. I ran into an issue using the Filametrix version due to it not have a mounting hole for one of the…
- Pobrania
- 62
- Polubienia
- 11
- Ocena
- 0
P
Printablesdanec
Voron Nitehawk SB: Complete Umbilical Mounting & Routing System— Voron3tz
09 Jul 2026: Added Gantry_Spine_Anchor_Body_Short.stl — a shortened version of the gantry anchor. This is the version I run on my own machine. Added based on community feedback. Update 26-05-2026: Galileo 2 (G2E) Adapter Two new parts let…
- Pobrania
- 59
- Polubienia
- 17
- Ocena
- 5
P
PrintablesRED
LDO Nitehawk Umbilical Exhaust Plate for Voron 2.4 - 4 Toolheads
LDO Nitehawk Umbilical Exhaust Plate for Voron 2.4 - 4 Toolheads I modified this for a Stealthchanger with 4 toolheads (still working on it) Print off the original PG7 blocks (add a little lubricant in the tracks for ease) Hardware: 5 M3…
- Pobrania
- 56
- Polubienia
- 20
- Ocena
- 0
P
PrintablesDevin Long
Orbiter 2 Dragonburner Nitehawk36 Mount V0.2
Nitehawk36 mount for Orbiter 2 extruder using dragonburner toolhead on Voron v0.2 (Has not yet been tested; will test soon. Please post results if you do test) UPDATE (2/12/25): I have modified the model and moved the mounting holes down…
- Pobrania
- 54
- Polubienia
- 13
- Ocena
- 0
P
Printablesoceanduck
Nitehawk 36 Sherpa Micro toolboard mount
I designed a toolboard mount for my Voron 0 to address some limitations I found in the Universal Mount for the NH36 toolboard when using the Sherpa Micro extruder. Some advantages compared to the universal mount: Does not interfere with…
- Pobrania
- 54
- Polubienia
- 7
- Ocena
- 4
P
PrintablesTushonk
Toolhead board DIN mount (EBB36/SHT36/NiteHawk-36)
To be used with https://www.printables.com/model/472505-din-rail-bracket-redux Uses standard M3 hardware Thanks to Brazuka for the inspiration
- Pobrania
- 53
- Polubienia
- 9
- Ocena
- 0
P
Printablesdanec
X Endstop Mod for Voron 2.4 (Common Anomaly UltraLight + LDO Nitehawk SB + ChaoticLab Tap V2)
I designed these parts to solve the X endstop mounting challenge on my Voron 2.4 build, specifically for the combination of the Common Anomaly UltraLight Aluminum X Beam , the LDO Nitehawk SB (umbilical), and the ChaoticLab Tap V2 . Since…
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDeVsFaN1830
NiteHawk SB Stealthburner PG7 Mount w/ Spring Steel Piano Wire Mounting
Printed with the top facing down on the bed. No supports needed. Mounting hardware is the same as a standard CW2 mount. Uses 0.8mm spring steel wire For the steel wire retention you will need a button head M2 self tapping screw. I used…
- Pobrania
- 50
- Polubienia
- 7
- Ocena
- 0
P
Printables8Bit
Nitehawk 36 3010 Fan Active Cooling
The original design had two major flaws. First, the back and front panels didn't fully cover the fan, leaving an aesthetic to be improved on. Secondly, the tolerances specifically for the standoffs on the plate were to tight (see below).…
- Pobrania
- 50
- Polubienia
- 11
- Ocena
- 0
P
PrintablesJon
Voron 0.2 - Nitehawk 36 Mount for Dragon Burner and Sherpa Mini - Internal Zip Ties
Slightly modified @Noble69's excellent Nitehawk36 mount to have the zip tie holes internal to the mount Use standard Voron settings and heat set inserts (M3*5*4) Printed at 0.15 layer height Designed supports can potentially fuse with…
- Pobrania
- 45
- Polubienia
- 4
- Ocena
- 0
P
PrintablesEdward Wenmouth
LDO Nitehawk36 Cover Modification for Voron Trident
LDO Nitehawk36 Cover Modification for Voron Trident I have remodelled the LDO Nitehawk36 Cover to fit the Voron Trident . The design now accommodates the necessary clearances for cable management,
- Pobrania
- 42
- Polubienia
- 4
- Ocena
- 5
P
PrintablesWayne Dowling
LDO Nitehawk USB adapter low profile din mount
ldo nitehawk usb adapter din mount m3 heat inserts
- Pobrania
- 40
- Polubienia
- 2
- Ocena
- 0
P
Printablesrandom.ae
Nitehawk 36 Toolhead PCB Mount for Wristwatch G2 Extruder
Print with Voron part settings Requires two m3 heatsets for securing the pcb Included some spacers that were helpful to me for fitment
- Pobrania
- 38
- Polubienia
- 10
- Ocena
- 0
P
PrintablesIdlerus
LDO Nitehawk 36 USB adapter mount for Voron V0
This is my Nitehawk USB Adapter mount for Voron V0.2 Nitehawk 36: https://docs.ldomotors.com/en/Toolboard/nitehawk-36 You can use default Adapter cover from:…
- Pobrania
- 37
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDani
nitehawk dragchain mount
i wanted the nitehawk board but wanted to use the dragchains still. i added the dragchain mount to the side of this.
- Pobrania
- 34
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEnderman Prints
Clockwork2 cablechain anchor for LDO Nitehawk
Remixed https://github.com/VoronDesign/Voron-Stealthburner/blob/main/STLs/Clockwork2/chain_anchor_2hole.stl Cablechain fixpoint taken 4mm upwards and 4mm -X direction to give more space to connector.
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
Printablesmr.paul
WristWatch G2 NiteHawk36 Mount (3 Point) BETA
This PCB mount was very close to working, but just was missing the last little bit to make it work well. The cable LDO provides is a bit chonky, so this extends the length of the cable support and better accommodates the overmolded end.…
- Pobrania
- 31
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDeVsFaN1830
Clockwork 2 / LDO Nitehawk SB Cover w/ 4010 Fan - FilamATrix
Made a cover w/ fan compatible with the FilamATrix toolhead cutter mod.
- Pobrania
- 28
- Polubienia
- 6
- Ocena
- 0
P
PrintablesNerobotiko
Nitehawk-36 Mini Stealthburner mount
Mount for attaching a Nitehawk-36 board to a Mini Stealthburner, based on the very nice wrap around cable mounting solution by @Synyster1911.
- Pobrania
- 25
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNeptunus0001
LDO Nitehawk-36 (NH36) Toolboard WW-BMG for A4T toolhead mount
LDO Nitehawk-36 (NH36) Toolboard WW-BMG for A4T toolhead mount Mount for installing a LDO Nitehawk-36 (NH36) toolhead board on an A4T toolhead using an WW-BMG extruder. Including bottom mounting slot for Xol-carriage.…
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0
P
Printablesmr.paul
Nitehawk36 Sherpa Mini Mount (4/6 point)
BOM 2x 18mm standoffs 2x 20mm standoffs 4x voron spec m3 heatset 6x bolts 2x 1/8" zip ties Print on back. Print it strong, don't skimp. Voron or monolith settings. On the sherpa side, just add 2-4mm to the bolts so they stick out the back…
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
Printablescyrillink
Nitehawk 36 ldo BMG Extruder IDGA / Clone Mount
Hey Team, I've picked up the Nitehawk 36 LDO and am figuring out how to mount it to my printer. The most suitable location I found is on the BNG extruder. This setup is designed to mount to the original bolt using a 40mm M3 bolt. To…
- Pobrania
- 24
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMHillyer
BETA Strain Relief for LDO Nitehawk NHK-36 Cable & Vitalii CNC EBB36 Mount
THIS MODEL IS A WORK IN PROGRESS This is designed to better mount an LDO Nitehawk NHK-36 cable (Described in the docs as "fully overmolded") to a Vitalii CNC EBB36 mount rigidly, including the spring steel umbilical guide. Personally I…
- Pobrania
- 21
- Polubienia
- 6
- Ocena
- 0
P
PrintablesZartan3003
Nitehawk g2v1
mount for nitehawk36 on a wristwatch g2
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNinefifty
Support bracket for Nitehawk-36 USB - G2SA - Dragonburner - v0.2
Extra support bracket for the Nitehawk-36 toolboard with the G2SA mount on a Dragonburner toolhead. On my v0.2 the lower hole on the mount (by Blamm) was unused so i made a bracket for it to prevent tilting of the toolhead during fast…
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
PrintablesExcit3D - Talon
Nitehawk-36 Fan Mounting Brackets
V2 Updated Adjusted standoff walls to be more than 2 .4mm walls thick. Adjusted standoff bore to be a little wider because screws were binding in the bore. A lot of the Nitehawk-36 fan mounts are 25 or 30mm and only connect to the…
- Pobrania
- 19
- Polubienia
- 10
- Ocena
- 0
P
PrintablestraviSS396
Orbiter NiteHawk 36 12V Fan Adapter for Ratrig ToolHead
Until the O2S comes out, I'm not aware of a toolboard that runs USB, gives you another USB for Beacon, and 12v to run a decent 4028. It seems like there was one more feature I needed, but I can't think of it now. After trying a few…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
Printablesdanec
Voron 2.4 CW2 Cover for Nitehawk-SB — Noctua & Wathai/Sunon 4010
Update — Rev3: PWM Fan Control via Leviathan The CW2 cover fan can now be controlled via Klipper instead of running at full speed all the time. What changed: Disconnect the fan's negative (-) wire from Nitehawk GND and route it through a…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBrian Johnson
Nitehawk 36-flat spring steal
Nitehawk 36-control board holder with flat spring steal umbilical holder
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
Printablesyuvalb
USB cable strain relief for LDO Nitehawk SB with screwless assembly
The rest of the parts from the original design are untouched. to assemble the strain relief itself you push it against the mount with the large holes aligned with the pins. once the strain relief is flush against the mount surface push it…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
Printableshardly
Nitehawk USB Adapter - Narrow
I wanted to get more of them closer together on the rail so I removed the sticky-outtie bit that I wasn't using, with a pocket knoife. Then I remixed the model. My pull request was merged so this file is also available in the official…
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesWorkshop Denizen
vz hextrudort short with moons stepper on vzprinthead nitehawk 36 mount
inspired by Svennixx's model but redesigned from scratch to put the nitehawk board up and to the left centering it on the toolhead rather than the motor. This is necessary because the heater terminals on the nitehawk interfere with the…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
Printableshawk16zz
FT EMS Voron V0.2 V2 with Nitehawk USB plate - V0 printable
Some Voron spec M3 heat set insets and M3 screws are needed to attach the raceway to the frame to hold the frame together. Grab the NH USB cover from the NH repo.
- Pobrania
- 13
- Polubienia
- 4
- Ocena
- 0
P
PrintablesManasisV
Nitehawk36 Din Rail Mount
A dirty remix of the LDO NH36 to work with DIN Rail Bracket for easier repairs. Requires two M3x6mm BHCS for mounting into the bracket.
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSunny D
Nitehawk-36 Mini Stealthburner mount
The original model was a nice minimalist solution for a mount that I could not find another solution for. The problem that I came across was there was nothing holding the toolhead board cable tight to the bottom of the pcb. This would…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPepijn van Vliet
Multicolor remix for LDO Nitehawk USB Adapter Cover
multicolor for + and - for the cover
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDood
Nitehawk 36 3007 Fan Mount
This is a simple low profile mount for a common 3007 fan for a Raspberry Pi, to mount on the back of a Nitehawk 36 USB board The fan clips cleanly in with no screws, and the mount is mounted through the standard mounting holes, making it…
- Pobrania
- 10
- Polubienia
- 5
- Ocena
- 0
P
PrintablesXERO PRINT
STEALTHBURNER NITEHAWK SB CABEL FIXATION MOD
i made this upgrade for myself . because i do not use the cable chain for my toolhead cable . and i wanted to fix the woble connection of the cable so it does move les when printing . also to try to have les nhk problems . i hope you like…
- Pobrania
- 9
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBuilder BB
Alternate Nitehawk Bolt and Cap
The parts need a well tuned printer as clearance between bolt and cap are 0.3mm. May require a strong strike on the bolt pusher to free the parts after printing. If so put it in the tube so the bolt has somewhere to go when struck. Paint…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRadosław Woźniak
nitehawk36 mount for orbiter2.5 and stealtchhanger no colision with optical sensor on dragonburner stealthchanger backplate
nitehawk36 backplate for orbiter2.5 and stealthchanger dragonburner backplate - no colision with optic sensor
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJeff Hengesbach
Nitehawk 36 Toolhead Board Mount for Wristwatch G2 on Stealthchanger with OptoTap
Nitehawk-36 Toolhead Board Mount for Wristwatch G2 on Stealthchanger w/Tap Clearance for the Optotap PCB is tight but available 3 Points of attachment to the toolhead Designed to work with the stock Stealthchanger backplate Printed Parts…
- Pobrania
- 4
- Polubienia
- 3
- Ocena
- 0
P
Printablesakashrpatel
Clips for use with LDO Nitehawk Toolhead Board and Voron 2020 Swing Arm and Metal Zip Ties
Use the clips to mount the metal zip ties to the 2020 Voron Arm for a no-sag umbilical connection for Voron printers that have a USB cable umbilical (LDO Nitehawk, BTT SB2209/2240, etc.) Follow the instructions on how to use the metal zip…
- Pobrania
- 3
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSpencerViridian
Nitehawk-36 + Orbiter 2.5 Mount w/ Spring Steel Slot (for Stealthchanger)
Remixed Tooks' mount with longer board standoffs and a slightly wider cable holder to better suit the cable included with the Nitehawk-36 toolboard. The connector didn't quite line up correctly when using this board/cable combination with…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCamara TAB3
nitehawk36-zipties-mount
nitehawk36 zipties mount stealthchanger
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNicholas
Nitehawk 36 VZBot CNC Printhead Mount
Changed the height and mounting point from the original model so it works with a Nitehawk 36
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
Printables
Stealthburner for a Nitehawk-SB and an LGX
Maturity: Very Good 5 prototypes. In use since 2024/10. A mounting to combine: Stealthburner LGX (not to be mistaken to the unsupported later LGX lite) Nitehawk-SB (and its fan PCB) Umbilical I would call it Casimodo due to its bump. I…
P
Printables
WWBMG Nitehawk-36/EBB36 Inline Anchor Mount
WWBMG toolhead PCB mounts seem to be uncommon, and even moreso when you want the umbilical anchor to be inline with the bowden tube / central axis of the toolhead. This toolhead PCB mount takes care of that. Note: The relief is apparently…
P
Printables
nitehawk dragchain mount
i wanted the nitehawk board but wanted to use the dragchains still. i added the dragchain mount to the side of this.
P
Printables
X Endstop Mod for Voron 2.4 (Common Anomaly UltraLight + LDO Nitehawk SB + ChaoticLab Tap V2)
I designed these parts to solve the X endstop mounting challenge on my Voron 2.4 build, specifically for the combination of the Common Anomaly UltraLight Aluminum X Beam , the LDO Nitehawk SB (umbilical), and the ChaoticLab Tap V2 . Since…
P
Printables
Nitehawk 36 / EBB36 - 3010 Fan
Extended the rear part for 3,6mm to fit an 3010 Fan properly, without bending.
P
Printables
Nitehawk 36-flat spring steal
Nitehawk 36-control board holder with flat spring steal umbilical holder
P
Printables
LDO Nitehawk USB adapter low profile din mount
ldo nitehawk usb adapter din mount m3 heat inserts
P
Printables
Nitehawk 36 ldo BMG Extruder IDGA / Clone Mount
Hey Team, I've picked up the Nitehawk 36 LDO and am figuring out how to mount it to my printer. The most suitable location I found is on the BNG extruder. This setup is designed to mount to the original bolt using a 40mm M3 bolt. To…