1 / 3
Voron v0.2 frame cover Nitehawk-36 USB + WAGO mount — zdjęcie 1
1 / 3

Voron v0.2 frame cover Nitehawk-36 USB + WAGO mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed version of the LDO umbilical cover for USB toolhead

Ocena
5 / 5
Polubienia
15
Pobrania
70
Wydruki
2
Wyświetlenia
499
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Recently switched from the original ldo picobilical to the Nitehawk-36 USB toolhead on my Voron v0.2.

Now with a step down buck converter added to power the Raspberry Pi there was no more need for the picobilical pcb frame cover, so i remixed it to mount the USB adapter pcb and added some additional WAGO's i use for lighting.

The pcb adapter cover is still mounted with the standard 3x M3x16 BHCS screws, the M3x8 screws for mounting the frame cover should be changed to 2x M3x10 since this plate is thicker. 

I found the best way is to mount the PCB with everything connected on the plate and mount the cover, then put the screw (on the USB cable side) on the stepper mount in place first, slide it in and place the second screw. Put the toolhead cable through the slot and secure it in place with some tyraps.

 

I don't use the original filament path or sensor so i didn't add this hole, i added the stepfile so everyone can remix it to their preference. I have remixed the added WAGO mounts too but can't find the link to the original file anymore.

Tagi