USB cable strain relief for LDO Nitehawk SB with screwless assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed the original design to make it easy to remove the USB cable from the extruder entirely in case it needs work.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The rest of the parts from the original design are untouched. to assemble the strain relief itself you push it against the mount with the large holes aligned with the pins. once the strain relief is flush against the mount surface push it down until the pins are well seated in the slots. in my case when i push the strain relief down i get a rather sattisfying click, but i guess that depends on the printer's tuning and material used.
I think maybe another remix would be in order for making the pin diameter a bit larger. that would require making the strain relief wider, too, which is why i didn't do it for now. if my pins break i will remix again and upload.
