1 / 7
Pi4 Fan Voron 3010 and 2510 Voron Self Tapping M2 Screws
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two screw pi fan for 2510 and 3010.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 208
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (13)Powiązane
Wanted a pi4 fan that was tall enough for a heat sink and used 2510 fans (it's what i had). Also added holes for 3010.
This is meant to be used with the voron back plates that use M2 self tapping screws. I included a tall and short version for people without heatsinks. The fan screws on with M3 bolts directly into plastic. The tall version needs a really thin screwdriver to install,
I like it because it only uses two screws to install and has two support pegs.
