Surly Midnight Special Fork Bottle Cage Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for attaching bottle cages to the fork legs of a surly midnight special.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
DESCRIPTION
A custom mount for attaching bottle cages to the fork legs of a surly midnight special. Mounts to the fork using the front rack bolt as well as two large zip ties.
The design is made for a 54cm midnight special with a 50mm fork offset. It might also fit on the larger frames with a 40mm offset but this has not been tested. The heat set inserts used are M5 with a length of 6mm and a 7mm diameter.
Wide tires might interfere with the mounts/bottles depending on the exact combination. With 40mm tires I have used tall 1L bottles in the mounts witthoutt issue.
DISCLAIMER
Use at your own risk. There is a danger of blocking the front wheel if anything breaks or comes loose. 3D-printing in a strong and tough material such as nylon is therefore recommended. Use threadlocker on the mounting bolt as well as a wider than stock M5 washer to spread out the bolt force on the mount.