Surly Midnight Special Fork Bottle Cage Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for attaching bottle cages to the fork legs of a surly midnight special.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
DESCRIPTION
A custom mount for attaching bottle cages to the fork legs of a surly midnight special. Mounts to the fork using the front rack bolt as well as two large zip ties.
The design is made for a 54cm midnight special with a 50mm fork offset. It might also fit on the larger frames with a 40mm offset but this has not been tested. The heat set inserts used are M5 with a length of 6mm and a 7mm diameter.
Wide tires might interfere with the mounts/bottles depending on the exact combination. With 40mm tires I have used tall 1L bottles in the mounts witthoutt issue.
DISCLAIMER
Use at your own risk. There is a danger of blocking the front wheel if anything breaks or comes loose. 3D-printing in a strong and tough material such as nylon is therefore recommended. Use threadlocker on the mounting bolt as well as a wider than stock M5 washer to spread out the bolt force on the mount.