ABS-GF Bar-End Weights for Rizoma 22 mm Alloy Handlebars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ducati Monster OEM Style Bar-End Weights for alloy Handlebars- Step file available on request
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Hardware: 2 × M6 × 40 mm DIN 912 socket head cap screws.
Run an M6 tap through the hole, even though the thread is already modelled.
Fit and tolerance: Designed for handlebars with an internal diameter of approximately 14.2–14.4 mm.
The split-collet design expands inside the handlebar as the screw is tightened, creating a very secure and rigid fit. Most of the clamping force and structural rigidity come from the M6 screw.
Recommended print settings:
6 perimeters/walls
25% 3D honeycomb infill
ABS-GF for optimal durability, stiffness, and reduced creep over time
https://fiberlogy.com/upload/techfiles/FIBERLOGY_ABSGF_TDS.pdf