ABS-GF Bar-End Weights for Rizoma 22 mm Alloy Handlebars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ducati Monster OEM Style Bar-End Weights for alloy Handlebars- Step file available on request
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Hardware: 2 × M6 × 40 mm DIN 912 socket head cap screws.
Run an M6 tap through the hole, even though the thread is already modelled.
Fit and tolerance: Designed for handlebars with an internal diameter of approximately 14.2–14.4 mm.
The split-collet design expands inside the handlebar as the screw is tightened, creating a very secure and rigid fit. Most of the clamping force and structural rigidity come from the M6 screw.
Recommended print settings:
6 perimeters/walls
25% 3D honeycomb infill
ABS-GF for optimal durability, stiffness, and reduced creep over time
https://fiberlogy.com/upload/techfiles/FIBERLOGY_ABSGF_TDS.pdf