M3 Thumbsticks for RC Controllers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement sticks for RC controller gimabls in different size options
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of different sized RC controller gimbal sticks. Tested on my Radiomaster Pocket controller, but they should fit onto any controller that uses sticks with an M3 thread.
There are 3 length options:
- Short (16mm Screws)
- Medium (20mm Screws, much like the original Radiomaster Pocket sticks)
- Long (25mm Screws)
Each one comes as a standard version (8.4mm diameter) and a "fat" version (12.3mm diameter and chamfered top).
Also each version comes with a chamfer inside for screws with sunken heads and a version without this chamfer for flat (pan head) screws.
Just drill some M3 screws with the right length into the printed parts and they are ready to be mounted on your radio.
The sticks are designed to be printed with TPU - I didn't test other materials, but I guess that might be difficult, as the holes are (intentionally) pretty tight.