Voron V0 1515 TPU extrusion liners with ramp for nut retention
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal 1515 TPU liners that put pressure on nuts to keep them in place. Easy to customize.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
1515 extrusions drive me crazy! The frustration is gone once you throw these on there. If you want to cover the entire slot you need at least two of them so you can move one to the side if you need to roll in a new nut.
These where made with LDO (Formbot post V0.2 and on) extrusion profiles and LDO pre-cut square nuts. They work fine with the nuts that are already captured in there too. Slide one of these in first, then slide a nut on top of it. Insert a long screw at most 90% into the nut then press down on the ramp with something to start the slide in. The initial insertion is easiest with just your hands. Moving it around you will need something that fits in there. A pick is nice, but not needed.
The regular nuts are quite a bit tighter than the square nuts. You can always scale in the Z a bit to make them easier with your hardware. Other extrusions might need scaling in the X and Y, this has only been tested with LDO hardware. If you see a mark on your extrusions, then you will have to use a nut that is at least 1/2mm shorter. The TPU does a great job squeezing together to go beyond the minimum thickness of the material and it also saves your extrusions from nasty marks.
They are very easy and quick to insert once you get the hang of it.
Extrusion and nut notes:
The LDO roll in nuts are just square nuts with the corners chamfered a bit. You can certainly roll in modified square nuts into your extrusion no matter what cross section you have, it will just take a bit of trial and error with a grinder.
The 3MF file included has the settings that worked well for me with Creality Matt brown A95 TPU. Make sure its bone dry! Make sure you select avoid crossing perimeters and nearest for the seam. I like using the scarf seam, it just comes out smoother.
The FreeCAD file and auto export macro are included for your custom application!