Liczymy pasujące modele…
Zack Freedman’s original Gridfinity Base Plates https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 Also inspired by https://www.printables.com/model/250550-gridfinity-magnet-light-baseplate Optimal settings:…
Get the original HERE ← Prints on its back. I filled in the original model most of the way to get it to print no supports.
After printing about a dozen of my earlier revision I decided to improve this by capturing the magnets inside the print. Now there is a pause at 2.6mm to insert the five magnets. This way there is no gluing or pressing magnets into place…
Took the fantastic model by cadandcookies and made minor modifications: Reduced tolerances on ¼-20 nut size. Added sacrificial bridges to the captured nut holes to allow them to be printed without supports. The part shown in the photo was…
Second Version I was trying to use the David D version of this print to stop by chickens from perching in an area. Those crafty girls decided they could “fix” it for me and was in pieces the next day. This bracket is a bit more rigid,…
I recommend full supports, but build plate only might work.
I added some snap geometry. Now it snaps in position.
This is a knob for an M5 bolt. I wanted something that didn't use the heat inserts and I wanted the nut to be buried. So I designed this based off of a matchfit knob. You have to insert a pause exactly at 8mm. At this point you insert the…
UofH UH University of Houston logo with or without captured magnets. When slicing the captured magnet file be sure to set the color change just before the cavities are covered. It will be a snug fit with a 2mm magnet. Be sure to check the…
Sculpture of Nicolas Maduro being transported to NYC, comes in two versions: split and full body. Split is better quality, but leaves a line that would need to be filled and sanded prior to painting.
I was learning how to model custom nuts and bolts in Fusion 360 when I had the idea to create this fidget toy. The bot has a stopper at the end to keep the nut from spinning off. I printed the nut and bolt with PLA at 0.20 layer height…
I needed a low profile captured nut knob…. so here we are! I made it a very tight press fit… I'd advise using a vice to gently coheres the nut into the print. Printed with Inland PLA+ on a Bambu P1P on “Slow”/"Silent" 3 walls and 35% infill
The 3D-scanner is built from a kit named ‘openscan basic’ available at https://www.openscan.eu. I printed the plastic parts myself. The original model has been established by putting together 80 photos from different positions via…
Infill=15% Quality=0.20 doesn't matter that's what I did though. Supports=I would use supports under the ball. Paint them on if you have prusa slicer.
This is a 2 part print in place nut that is captured on the bolt between two fixed ends and is basically the same print as the impossible nut I posted but I added a top and bottom to the bolt to make it easier to hold. I included both the…
Please like and follow and post your makes. I printed a Texas A&M magnet from another user and I was not able to use it with only two magnet holes the print was too heavy to hold. I decided to make my own design with available artwork…
This is my first submission while I wait for my MK3S+ to arrive. Expect great things.
Daniele used the Revopoint RANGE 2 to scan this bass-relief statue of Madonna delle Grazie outside.
Goal: a new high current loop key design that is: easily 3D printable captured / self-contained / no losing keys or carrying another fob compact & small footprint secure mounting locks out when powered down slick looking reliable Specs:…
The GPIO Hackerboard is a great addition but it doesn't come with any good options for placement or retention. Enter a low-profile, fast-printing holder that sticks anywhere a magnet will. The cutout on the bottom should prevent…
A cute ghost in a cage!
This model seals the picture in the frame. The picture is captured and can't be removed without destroying the frame. You have heard of capturing magnets or bolts in a plastic model; this model captures the picture. The result is very…
A quick remix of Schnipp's fantastic Two Way Bolt, with a lengthened shaft and a bolt head on each end to keep the nut in place. Make sure to check out the original! Printed the nut separately, then printed the bolt vertically using the…
My grandson is fascinated by marble mazes and ball runs, but he has a younger brother who will attempt to swallow the marbles if given the opportunity, so i thought an entrapped marble maze was just what he needed! Designed specifically…
This is a dice tower with hexagon tiles by Nacelle on Thingiverse, ideal for Catan. (reupload) original can be found at: https://www.thingiverse.com/thing:4266921
This novel curiosity rattles when you shake it. It consists of 2 separate matrix of cubes with one printed inside the other. The smaller matrix is -3 the size of the larger matrix. The smaller matrix is not attached to the larger matrix.…
Davide captured this bust of Pope Innocenzo XII in the Museo di Roma with his Revopoint MIRACO. Size: 63 x 56 x 40 cm
Simple filament cutter for < 2mm filament that reuses the extra Bambu filament cutters. Print as oriented in 3mf file. No supports needed. Need to pause at layer 27 and 166 to insert the magnets. Magnets should be 2.7mm thick by 8mm wide.…
The MINI 2, with its 0.02 mm precision and powerful blue light, provides an exceptional experience.
Daniele used the Revopoint RANGE 2 to 3D scan the left column of the church dedicated to Madonna delle Grazie.
Let your Valentine know that your heart is theirs by making them a You've Captured My Heart 3D print! You can set your captured heart on any flat surface or hang it using the ring at the top of the cage. PLA version: PETG version: The…
Was just seeing if I could do it. Probably don't need a skirt, but I have adhesion anxiety. I used black duct tape on the back of the quarters (on like the 3rd attempt). Drop the quarters in place, tape side up, on layer 21-22. layer 23…
Daniele used the Revopoint RANGE 2 to perfectly capture this motorbike saddle. Shop now with Exclusive Code: COMMPR12.
A unique 3D printable creation — this Fidget Ring Spinner, Print in Place, Spinning Outer Band, Captured Bearings Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY File…
A great design already but I just prefer to have the hex nuts embedded in the bracket. Makes install just a bit easier. Made for M3 bolts and nuts… 5.5mm across flats.
This is a bowden extruder I designed to capture the push-fit connector. It will fit the NEMA 17 stepper profile. I also made the filament path modular so others can change it down the road. HARDWARE REQUIRED: Nema 17 stepper motor idler…
Overview I needed to mount a 10" rackmount system onto some wire shelving. This bracket helps with that. Assembly is pretty straight forward. Put the nut in the hole, and then thread the screw in to whatever you need. The zip ties should…
This was designed for quickly moving my M14 Eyelet around my Titan T-3 Power Rack. I printed with PLA+, 4 walls, and 60% infill on a Bambu Labs P1S
This model was ideated to be larger, but I settled on three knives because that's how many I usually take camping. The bar is supposed to be spring loaded. The bar prints in two parts and is keyed to a fulcrum in the block. The drawer is…
Needed two knobs for M8 all-thread for a table saw joining and tapering sled. This design uses a captured M8 nut. Insert before covering layer, I use M600 for pausing (edit gcode). I've since used this design in other projects and it's…
It is articulated Category: Other
A unique 3D printable creation — this Fidget Ring Spinner, Print in Place, Spinning Outer Band, Captured Bearings Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY File…
A unique 3D printable creation — this Fidget Ring Spinner, Print in Place, Spinning Outer Band, Captured Bearings Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY File…
A unique 3D printable creation — this Fidget Ring Spinner, Print in Place, Spinning Outer Band, Captured Bearings Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY File…
I needed a stronger magnet for this that also would not come out. Set a pause on your machine right before the layer that will cover the hole. I placed a small bit of superglue in the hole before inserting the magnet. Make sure to let it…
I have the need to mate a 1/4" thick piece of aluminum to a 1/2" round tubing. I need to be able to slide the mated aluminum along the tubing, and be able to lock it in place. This thing is the tube connector, with a captured nut on the…
A fidget spinner with no bearing to buy: the three-lobe body spins round a hub that is trapped by a V-shaped ridge, so it comes off the printer in one piece, already working. Pinch the hub top and bottom and flick a lobe. DETAILS • About…
Captured ball 50mmx50mmx50mm cube 5mm cage 50mm ball
