1 / 2
Lucky Clover Magnetic Fidget Slider w/Captured Magnets (6x2mm) — zdjęcie 1
1 / 2

Lucky Clover Magnetic Fidget Slider w/Captured Magnets (6x2mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fidget slider using captured magnets for satisfying haptic feedback and click with 6x2mm magnets.

Ocena
5 / 5
Polubienia
42
Pobrania
246
Wydruki
7
Wyświetlenia
1844
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

After printing about a dozen of my earlier revision I decided to improve this by capturing the magnets inside the print. Now there is a pause at 2.6mm to insert the five magnets. This way there is no gluing or pressing magnets into place anymore.

Fidget slider using captured magnets for satisfying haptic feedback and click with 6x2mm magnets. The convex shape and debossed clover leaves ensure a comfortable grip for easy manipulation without causing hand fatigue. Small size makes this easy to pocket. I put one in all my jackets.

Parts

(10) 6x2 mm rare earth magnets

Printing & Assembly

You need to insert a pause at the top of the magnets. You probably want to use the custom layer heights and pause point in my attached 3mf file for smoothness and multiple layers above the magnets.

If you have the textured bed, use that since it makes the fidget more slippery.

I print in 3D870 (HTPLA+ / PLA Pro) usually.

Tagi