Lucky Clover Magnetic Fidget Slider w/Captured Magnets (6x2mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fidget slider using captured magnets for satisfying haptic feedback and click with 6x2mm magnets.
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 246
- Makes
- 7
- Views
- 1,844
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
After printing about a dozen of my earlier revision I decided to improve this by capturing the magnets inside the print. Now there is a pause at 2.6mm to insert the five magnets. This way there is no gluing or pressing magnets into place anymore.

Fidget slider using captured magnets for satisfying haptic feedback and click with 6x2mm magnets. The convex shape and debossed clover leaves ensure a comfortable grip for easy manipulation without causing hand fatigue. Small size makes this easy to pocket. I put one in all my jackets.
Parts
(10) 6x2 mm rare earth magnets
Printing & Assembly
You need to insert a pause at the top of the magnets. You probably want to use the custom layer heights and pause point in my attached 3mf file for smoothness and multiple layers above the magnets.
If you have the textured bed, use that since it makes the fidget more slippery.
I print in 3D870 (HTPLA+ / PLA Pro) usually.