Bowden Extruder with captured connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bowden extruder I designed to capture the push-fit connector. It will fit the NEMA 17 stepper profile. I…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a bowden extruder I designed to capture the push-fit connector.
It will fit the NEMA 17 stepper profile.
I also made the filament path modular so others can change it down the road.
HARDWARE REQUIRED:
Nema 17 stepper motor
idler bearing is 625zz
2x 16mm M3 bolt for mounting male piece to stepper
1x 18mm M3 bolt for mounting male piece to stepper (idler fulcrum)
long M3 bolt and spring and a couple washers for idler
ADJUSTMENTS ONGOING AS I PROTOTYPE
v1 9/17/2016
v2 9/26/2016 -- filament path removed for now. not needed except for flexible filaments, anyways
public Fusion 360 project link: http://a360.co/2deVcFK
Print Settings
Notes:
Don't let it warp while printing or it won't fit together nicely.
Category: 3D Printer Extruders