UofH UH University of Houston logo with or without captured magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UofH UH University of Houston logo with or without captured magnets. Go Coogs!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 126
- Wydruki
- 1
- Wyświetlenia
- 444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
UofH UH University of Houston logo with or without captured magnets. When slicing the captured magnet file be sure to set the color change just before the cavities are covered. It will be a snug fit with a 2mm magnet. Be sure to check the clearance for yourself. If you have concerns you can always stretch the Z axis by a few percentage points. I recommend 7mmx2mm magnets which work well. I've also used 9mmx2mm magnets which work well too and I had to press them in a bit. No issues at all with my prints.
I used Inland PLA+ white and true red.