UofH UH University of Houston logo with or without captured magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
UofH UH University of Houston logo with or without captured magnets. Go Coogs!
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 126
- Makes
- 1
- Views
- 444
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
UofH UH University of Houston logo with or without captured magnets. When slicing the captured magnet file be sure to set the color change just before the cavities are covered. It will be a snug fit with a 2mm magnet. Be sure to check the clearance for yourself. If you have concerns you can always stretch the Z axis by a few percentage points. I recommend 7mmx2mm magnets which work well. I've also used 9mmx2mm magnets which work well too and I had to press them in a bit. No issues at all with my prints.
I used Inland PLA+ white and true red.