1 / 2
Print-in-Place Fidget Spinner - No Bearing Needed, Captured Hub, 29 Minutes (OpenSCAD) — zdjęcie 1
1 / 2

Print-in-Place Fidget Spinner - No Bearing Needed, Captured Hub, 29 Minutes (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A three-lobe fidget spinner that needs no bearing: the body spins on a captured hub. One piece, no supports.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
8
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A fidget spinner with no bearing to buy: the three-lobe body spins round a hub that is trapped by a V-shaped ridge, so it comes off the printer in one piece, already working. Pinch the hub top and bottom and flick a lobe.

DETAILS

• About 69 mm across and 13 mm thick, with 0.45 mm spin clearance.

• No supports: the ridge and groove have 45-degree faces and the hub cap flares at 45 degrees. Bambu Studio: 29 min, 12 g, no warnings.

• Twist the body firmly once after printing to free it. It spins for a few seconds rather than minutes; it isn't a ball-bearing spinner.

CUSTOMIZE (OpenSCAD)

Spin clearance and how far out the lobes reach.

Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.

Tagi