Print-in-Place Fidget Spinner - No Bearing Needed, Captured Hub, 29 Minutes (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A three-lobe fidget spinner that needs no bearing: the body spins on a captured hub. One piece, no supports.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A fidget spinner with no bearing to buy: the three-lobe body spins round a hub that is trapped by a V-shaped ridge, so it comes off the printer in one piece, already working. Pinch the hub top and bottom and flick a lobe.
DETAILS
• About 69 mm across and 13 mm thick, with 0.45 mm spin clearance.
• No supports: the ridge and groove have 45-degree faces and the hub cap flares at 45 degrees. Bambu Studio: 29 min, 12 g, no warnings.
• Twist the body firmly once after printing to free it. It spins for a few seconds rather than minutes; it isn't a ball-bearing spinner.
CUSTOMIZE (OpenSCAD)
Spin clearance and how far out the lobes reach.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.