Filament Cutter with Captured Magnet Spring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another filament cutter. This one is my own design and uses captured magnets to act as the springs.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple filament cutter for < 2mm filament that reuses the extra Bambu filament cutters. Print as oriented in 3mf file. No supports needed. Need to pause at layer 27 and 166 to insert the magnets.
Magnets should be 2.7mm thick by 8mm wide. Magnets should be inserted in opposite direction to create the spring effect. In the suggested print orientation they are all inserted with the same polarity. I stack them on a piece of metal near the printer and ensure I maintain the orientation when inserting.
The model also has a built-in lip on both parts that allows the pieces to snap together and the spring to not ejected the two parts.