Lithophane Moon LED mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base attachment for Lithophane Sphere for LED insert. Designed to hide attachment for wireless control use.
- Ocena
- 4 / 5
- Polubienia
- 35
- Pobrania
- 134
- Wydruki
- 1
- Wyświetlenia
- 3167
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
LED Attachment for Lithophane Moon Lamp
Simple attachment which provides a tube surface for LEDs to be wrapped around, and to conceal the wireless connectors.
Steps:
Parts:
- Filament for moon, I used glow in the dark Prusa PLA.
- Filament for stand
- LED KIT: The one I ordered
- ❗Note❗: Ensure you have wireless (RF) control, not infrared (IR)
Step 1:
Print the Lithophane Moon - Designer Lithophane Moon Lamp
Step 2:
Print the mod, I recommend using the solid-moon-attachment and insert-tube
Check that the moon attachment locks into the moon base
Step 3:
Run the power through the center of the tube and base (see 5th Picture) and test the lights
Make sure all the connectors pass through and can/do attach
Step 4:
Stick down the LED's in a tight spiral around the insert-tube.
Re-test the LED's to be sure
Step 5:
Glue the solid-moon-attachment to the insert-tube
Glue the LED strip to the insert-tube as the default adhesive may not be good enough at the top.
Step 6:
Lock the moon base into the moon.
Step 7:
Enjoy :)