Lithophane Moon LED mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base attachment for Lithophane Sphere for LED insert. Designed to hide attachment for wireless control use.
- Rating
- 4 / 5
- Likes
- 35
- Downloads
- 134
- Makes
- 1
- Views
- 3,167
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
LED Attachment for Lithophane Moon Lamp
Simple attachment which provides a tube surface for LEDs to be wrapped around, and to conceal the wireless connectors.
Steps:
Parts:
- Filament for moon, I used glow in the dark Prusa PLA.
- Filament for stand
- LED KIT: The one I ordered
- ❗Note❗: Ensure you have wireless (RF) control, not infrared (IR)
Step 1:
Print the Lithophane Moon - Designer Lithophane Moon Lamp
Step 2:
Print the mod, I recommend using the solid-moon-attachment and insert-tube
Check that the moon attachment locks into the moon base
Step 3:
Run the power through the center of the tube and base (see 5th Picture) and test the lights
Make sure all the connectors pass through and can/do attach
Step 4:
Stick down the LED's in a tight spiral around the insert-tube.
Re-test the LED's to be sure
Step 5:
Glue the solid-moon-attachment to the insert-tube
Glue the LED strip to the insert-tube as the default adhesive may not be good enough at the top.
Step 6:
Lock the moon base into the moon.
Step 7:
Enjoy :)