1 / 1
Queen Regent – Sovereign of the Iron Crown | 32mm & 75mm Fantasy Miniature | FDM & Resin — zdjęcie 1

Queen Regent – Sovereign of the Iron Crown | 32mm & 75mm Fantasy Miniature | FDM & Resin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Regal Queen Regent miniature in ornate armor and crown, commanding presence with scepter and stone‑carved base.

Ocena
0 / 5
Polubienia
7
Pobrania
28
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The Queen Regent stands as a symbol of power, wisdom, and unyielding command. Sculpted in exquisite detail, she wears layered plate armor and a flowing cape crowned with royal authority. Her scepter signifies dominion and arcane strength, while her poised stance exudes confidence and control. The cracked stone base and scattered skulls beneath her feet evoke the trials of conquest and the weight of rulership.

Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.

⚙ Print Specs

  • Supports: Standard tree auto supports

  • Category: Characters & Monsters

  • Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)

  • Material: Resin or PLA+ for best detail retention

  • Scale: Heroic 1:10 (adjustable for tabletop use)

  • Orientation: Crouched pose with daggers supported

🧱 FDM Printing

  • Use Tree Supports (Default) for optimal overhang coverage.

  • Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.

  • Recommended materials: PLA+ or PETG for best surface finish.

  • Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.

  • Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.

🧪 Resin Printing

Use the following settings for reliable, high‑detail results:

Printer: Elegoo Saturn 4 Ultra 16K

Exposure Settings:

  • Layer Height: 0.05 mm

  • Bottom Layers: 5

  • Exposure Time: 2.75 s

  • Bottom Exposure Time: 37 s

  • Transition Layers: 10 (Linear)

  • Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s

Advanced Settings:

  • Anti‑Aliasing: Level 8

  • Print Time Compensation: Enabled (0.93 s)

  • Light PWM: 255

  • Bottom Light PWM: 255

Supports & Orientation:

  • Use Auto Orientation and Auto Supports (Light) in ChituBox.

  • Ensure proper drainage and avoid flat surfaces directly on the build plate.

Tagi