Crown Prince Paladin – Lion of the Silver Throne | 32mm & 75mm Fantasy Miniature | FDM & Resin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heroic Crown Prince Paladin miniature with lion‑emblazoned shield and sword, perfect for resin or FDM printing.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Crown Prince Paladin embodies valor, nobility, and divine strength. Clad in ornate plate armor and crowned with royal authority, he stands resolute upon a stone base marked by the fallen. His lion‑emblazoned shield symbolizes courage and leadership, while his sword gleams with righteous purpose. Every detail—from the engraved armor to the flowing cape—captures the essence of a warrior born to defend both kingdom and faith.
Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.
⚙ Print Specs
Supports: Standard tree auto supports
Category: Characters & Monsters
Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)
Material: Resin or PLA+ for best detail retention
Scale: Heroic 1:10 (adjustable for tabletop use)
Orientation: Crouched pose with daggers supported
🧱 FDM Printing
Use Tree Supports (Default) for optimal overhang coverage.
Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.
Recommended materials: PLA+ or PETG for best surface finish.
Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.
Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.
🧪 Resin Printing
Use the following settings for reliable, high‑detail results:
Printer: Elegoo Saturn 4 Ultra 16K
Exposure Settings:
Layer Height: 0.05 mm
Bottom Layers: 5
Exposure Time: 2.75 s
Bottom Exposure Time: 37 s
Transition Layers: 10 (Linear)
Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s
Advanced Settings:
Anti‑Aliasing: Level 8
Print Time Compensation: Enabled (0.93 s)
Light PWM: 255
Bottom Light PWM: 255
Supports & Orientation:
Use Auto Orientation and Auto Supports (Light) in ChituBox.
Ensure proper drainage and avoid flat surfaces directly on the build plate.