1 / 1
Battle Cleric – Hammer of the Faithbound Order | 32mm & 75mm Fantasy Miniature | FDM & Resin — zdjęcie 1

Battle Cleric – Hammer of the Faithbound Order | 32mm & 75mm Fantasy Miniature | FDM & Resin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Battle Cleric miniature with holy warhammer and armor detail—perfect for resin or FDM printing and painting.

Ocena
0 / 5
Polubienia
10
Pobrania
60
Wydruki
0
Wyświetlenia
102
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

🛡 Full Character Description

The Battle Cleric stands as a stalwart defender of faith and justice. Sculpted in commanding detail, he wields a massive warhammer engraved with sacred sigils, his hooded visage radiating divine resolve. Layered armor and flowing robes mark him as both warrior and priest, while his raised hand channels holy power against the forces of darkness. The cracked stone base and scattered skulls beneath his feet tell the story of countless battles fought in the name of light.

Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a heroic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate divine might and battlefield devotion.

⚙ Print Specs

  • Supports: Standard tree auto supports

  • Category: Characters & Monsters

  • Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)

  • Material: Resin or PLA+ for best detail retention

  • Scale: Heroic 1:10 (adjustable for tabletop use)

  • Orientation: Upright with hammer supported

🧱 FDM Printing

  • Use Tree Supports (Default) for optimal overhang coverage.

  • Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.

  • Recommended materials: PLA+ or PETG for best surface finish.

  • Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.

  • Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.

🧪 Resin Printing

Use the following settings for reliable, high‑detail results:

Printer: Elegoo Saturn 4 Ultra 16K

Exposure Settings:

  • Layer Height: 0.05 mm

  • Bottom Layers: 5

  • Exposure Time: 2.75 s

  • Bottom Exposure Time: 37 s

  • Transition Layers: 10 (Linear)

  • Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s

Advanced Settings:

  • Anti‑Aliasing: Level 8

  • Print Time Compensation: Enabled (0.93 s)

  • Light PWM: 255

  • Bottom Light PWM: 255

Supports & Orientation:

  • Use Auto Orientation and Auto Supports (Light) in ChituBox.

  • Ensure proper drainage and avoid flat surfaces directly on the build plate.

Tagi