1 / 1
Captain of the Guard – Lion’s Shield of the Crownlands | 32mm & 75mm Fantasy Miniature | FDM & Resin — zdjęcie 1

Captain of the Guard – Lion’s Shield of the Crownlands | 32mm & 75mm Fantasy Miniature | FDM & Resin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Captain of the Guard miniature with lion‑crest shield and sword, perfect for resin or FDM printing and painting.

Ocena
0 / 5
Polubienia
10
Pobrania
50
Wydruki
0
Wyświetlenia
103
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

⚔ Full Character Description

The Captain of the Guard stands as the unwavering protector of the royal court. Sculpted in commanding detail, he bears the lion‑emblazoned shield of the Crownlands—a symbol of courage, loyalty, and strength. His full plate armor and poised stance reflect years of disciplined service, while the sword at his side speaks of battles fought in defense of the realm. The rocky base and scattered skulls beneath his feet evoke the aftermath of victory and the cost of duty.

Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a heroic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate honor and leadership.

⚙ Print Specs

  • Supports: Standard tree auto supports

  • Category: Characters & Monsters

  • Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)

  • Material: Resin or PLA+ for best detail retention

  • Scale: Heroic 1:10 (adjustable for tabletop use)

  • Orientation: Upright with shield and sword supported

🧱 FDM Printing

  • Use Tree Supports (Default) for optimal overhang coverage.

  • Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.

  • Recommended materials: PLA+ or PETG for best surface finish.

  • Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.

  • Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.

🧪 Resin Printing

Use the following settings for reliable, high‑detail results:

Printer: Elegoo Saturn 4 Ultra 16K

Exposure Settings:

  • Layer Height: 0.05 mm

  • Bottom Layers: 5

  • Exposure Time: 2.75 s

  • Bottom Exposure Time: 37 s

  • Transition Layers: 10 (Linear)

  • Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s

Advanced Settings:

  • Anti‑Aliasing: Level 8

  • Print Time Compensation: Enabled (0.93 s)

  • Light PWM: 255

  • Bottom Light PWM: 255

Supports & Orientation:

  • Use Auto Orientation and Auto Supports (Light) in ChituBox.

  • Ensure proper drainage and avoid flat surfaces directly on the build plate.

Tagi