Court Assassin – Shadow of the Crown | 32mm & 75mm Fantasy Miniature | FDM & Resin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stealthy Court Assassin miniature with twin daggers and hooded armor—perfect for resin or FDM printing.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🗡 Full Character Description
The Court Assassin moves unseen through the corridors of power, striking swiftly and vanishing without a trace. Sculpted in a dynamic crouched pose, this figure captures the tension of a silent killer moments before the strike. His hooded cloak and layered armor conceal his identity, while twin daggers gleam with lethal precision. The cracked stone base and scattered skulls beneath his feet evoke the grim legacy of his craft—loyalty paid in blood and silence.
Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.
⚙ Print Specs
Supports: Standard tree auto supports
Category: Characters & Monsters
Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)
Material: Resin or PLA+ for best detail retention
Scale: Heroic 1:10 (adjustable for tabletop use)
Orientation: Crouched pose with daggers supported
🧾 Print Instructions
🧱 FDM Printing
Use Tree Supports (Default) for optimal overhang coverage.
Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.
Recommended materials: PLA+ or PETG for best surface finish.
Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.
Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.
🧪 Resin Printing
Use the following settings for reliable, high‑detail results:
Printer: Elegoo Saturn 4 Ultra 16K
Exposure Settings:
Layer Height: 0.05 mm
Bottom Layers: 5
Exposure Time: 2.75 s
Bottom Exposure Time: 37 s
Transition Layers: 10 (Linear)
Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s
Advanced Settings:
Anti‑Aliasing: Level 8
Print Time Compensation: Enabled (0.93 s)
Light PWM: 255
Bottom Light PWM: 255
Supports & Orientation:
Use Auto Orientation and Auto Supports (Light) in ChituBox.
Ensure proper drainage and avoid flat surfaces directly on the build plate.
Recommended resin: ABS‑like or high‑detail gray for crisp edges and smooth surfaces.