Malolo Raspberry Pi 4 H20 Hex Top - Single Material, 30 mm Fan Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single-material H20 hex top for Malolo’s Raspberry Pi 4 snap-fit case, with 30 mm fan rails and an integrated fan guard.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a single-material version of the tall H20 hex top cover for Malolo’s screw-less / snap-fit Raspberry Pi 4 Model B case.
In the original model, this specific H20 / Hex / Fan30 / Rails combination is only available as a two-part multicolor version:
Top_H20_Hex_MM2_Color1_Fan30_Rails.stl
Top_H20_Hex_MM2_Color2_Fan30_Rails.stl
I combined the cover into a single printable part and added an integrated fan guard while preserving the original case geometry, snap-fit system and file-naming convention.
Included file
Top_H20_Hex_SM_Fan30_Rails.stl
Features
• Tall H20 top cover
• Hexagonal ventilation openings
• Mounting rails for a 30 mm fan
• Integrated fan guard
• Single-material printing
• Compatible with the original snap-fit case system
Compatibility
This model replaces only the top cover.
The case bottom, 30 mm fan sled and any stands or accessories must be downloaded from the original Malolo model.
Designed for the Raspberry Pi 4 Model B and the original Malolo screw-less / snap-fit case.
Printing
Print in the supplied orientation with the outside face on the build plate.
Supports are not required.
Recommended settings:
• Layer height: 0.20 mm
• Perimeters: 3
• Infill: 15–20%
• Material: PLA, PETG or another suitable rigid filament
The uploaded STL measures approximately 90.6 × 61.4 × 23.4 mm.
Thanks to Malolo for the original case design and its excellent modular file-naming system.