Fluke 8000 series meter stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a replacement stand for these vintage handheld meters. It's not uncommon for the original stand pegs that go…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Here's a replacement stand for these vintage handheld meters. It's not uncommon for the original stand pegs that go into the case to break off. Note the bevel feature opposite the pegs - this allows for insertion and removal of the stand without hanging up in the slot in the case. To insert/remove, hold the stand at about a 30 degree angle to the case and compress the arms a bit so that the peg can snap into / out of the case.
Print in a high strength material, such as ABS, since the pegs that go into the case are the weak point.
Fusion360 design file included.
Did you build it? Please leave a comment and rating.
If you really love it you're welcome to throw me a bone. Thank you. :)