Fluke 8000 series meter stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here's a replacement stand for these vintage handheld meters. It's not uncommon for the original stand pegs that go…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 236
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Here's a replacement stand for these vintage handheld meters. It's not uncommon for the original stand pegs that go into the case to break off. Note the bevel feature opposite the pegs - this allows for insertion and removal of the stand without hanging up in the slot in the case. To insert/remove, hold the stand at about a 30 degree angle to the case and compress the arms a bit so that the peg can snap into / out of the case.
Print in a high strength material, such as ABS, since the pegs that go into the case are the weak point.
Fusion360 design file included.
Did you build it? Please leave a comment and rating.
If you really love it you're welcome to throw me a bone. Thank you. :)