Aqara Doorbell Camera G400 Chime Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cleanly mount the G400's chime unit with an Apple 5W charger
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
I thought the intended mounting scheme for the Aqara Doorbell Camera G400's chime was clumsy so I designed this mount that results in a much tidier look when you can't easily hide the chime behind furniture. With a short right angle to right angle cable and an Apple charger, this model makes the chime appear as a single integrated object again. The buttons for adjusting the volume and chime tone are also still accessible.
I printed this in PLA on my MK4S in PLA, using a 0.4mm nozzle and no supports. After printing, simply slide cable the charger and chime together with the cable and slide both into case. Then, plug into the wall.
Other Required Hardware:
Apple 5W Charger
Short 90 degree USB Type A to USB Type C cable, such as aceyoon Short 90 Degree USB C Cable,Right Angle USB A to USB C Cord,Fast Charging Mini USB C 0.6ft Nylon Braided Cable
If you're looking for something similar for the G4 chime, this model may work instead. The G400 chime is smaller and has a different layout.