Roll-Ender Painter's Pyramids — No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Painter's pyramids that print with no supports and barely any filament. Perfect for the sad end of a roll.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a set of these at the store for eleven dollars. Then I lost them. Then I bought another set. Then I found the first set. So now I design my own, because apparently that's the lesson I took from this.
What they are: painter's pyramids — the little tripods you set a workpiece on so you can paint or stain the edges without gluing your project to a drop cloth. Trussed out so they use barely any plastic and still hold a cabinet door without folding.
Why you'll actually print these
No supports. Prints flat on one face, comes off the plate clean.
Fast. You'll have a set before you've finished deciding what color to paint the thing.
Almost no filament. This is the print you send when the roll is making that hollow rattle noise and you refuse to admit it's over.
Print settings
0.2mm layer, 3 walls, 15% infill, 3.86g
Nothing here is fussy. PLA is fine. PETG if you're painting with something aggressive and want the extra chemical resistance.
Notes
Print more than you think you need. Six feels like plenty right up until you're finishing a tabletop with one hand and holding the corner up with the other.
I'm John. I've got a garage full of half-finished consequences and a print queue longer than my attention span. If that sounds familiar, you're in the right place.