Telescope tube phone mount with a spring-tensioned jaw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phone mount for a telescope, so phone can be used as Push-to guide or star chart.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a very early and experimental model, work in progress. Phone mount for a telescope, so phone can be used as Push-to guide or star chart. The model has two parts, a clamp/phone holder and a moving jaw which presses against the phone to keep it in place. Right now it uses small springs.
Although this design works best with 70mm telescopes, larger telescopes can also use this model with foam tape added to the feet, to better conform to the curvature of the telescope tube.
There also is a version will give you the option of mounting the phone on a Vixen-style finder scope bracket. Files marked *Vixen*.stl are the files for this version.
Files:
.stl files for the clamp and jaw.
License
CC BY-NC-SA — attribution required, non-commercial use only, derivatives must stay open under the same
terms.
Credits
Design, testing, and all the physical building/iteration by the maker. OpenSCAD source developed with the
help of Claude (Anthropic).