slip on mallet head for hammer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a mallet for some leather working and I didn't have one, but I did have a hammer. I made this to fit over a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I needed a mallet for some leather working and I didn't have one, but I did have a hammer. I made this to fit over a standard 16 oz claw hammer. If you have a different size hammer you can scale up or down with your slicer. I printed it with PLA at 100% but if you need something softer try TPU or PETG. This will most likely not hold up to prolonged or repeated use, but if you need a mallet and all you have is a hammer and a 3d printer this will get you started. Also, be advised you do not need to use the most disgusting hammer you can find, I just happened to never have cleaned this one.
Category: Hand Tools