slip on mallet head for hammer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a mallet for some leather working and I didn't have one, but I did have a hammer. I made this to fit over a…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I needed a mallet for some leather working and I didn't have one, but I did have a hammer. I made this to fit over a standard 16 oz claw hammer. If you have a different size hammer you can scale up or down with your slicer. I printed it with PLA at 100% but if you need something softer try TPU or PETG. This will most likely not hold up to prolonged or repeated use, but if you need a mallet and all you have is a hammer and a 3d printer this will get you started. Also, be advised you do not need to use the most disgusting hammer you can find, I just happened to never have cleaned this one.
Category: Hand Tools