Search results: mallet

Counting matching models…

PrintablesKratus

MFT mallet holder

Holds regular rubber mallet To be used with MFT mounting plate - link Required fasteners: 2x M6x60 socket head screw (DIN 912)

Downloads: 55
Likes: 22
Rating: 0

Order a print of this model

Printables

EN: Reflex hammer with chamber for brush and needle for sensitivity testing. The cap nut on the hammer head is size M8. We recommend inserting / gluing washers of sizes M6 and M8 into the hammer head before attaching the TPU parts for the…

Order a print of this model

Printables

Mallet holder

its a thing you put onto you music stand in the percussion area to put your mallets in easier.

Order a print of this model

Printables

Parametric TPU Hammer Mallet Cap

Convert your steel hammer into a non-marring mallet with this parametric TPU hammer cap! Perfect for tapping wood or 3D printed parts into place without damage. This design revisits one of my earliest models with improvements to fit, and…

Order a print of this model

Printables

Small mallet

This is a small light-duty mallet. Print the head in TPU 95A (I used https://www.amazon.com/dp/B0BXNWK6NS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 ). It is important to have the middle part that connects to the handle at a low…

Order a print of this model

Printables

HSW-Drilling Hammer or Mallet Holder

Yet another hammer holder for the Honeycomb Storage wall system. This one is big enough, and I hope strong enough, for a heavy drilling hammer. A rubber mallet (bigger but much lighter than the drilling hammer) will also fit OK. It needs…

Order a print of this model

Printables

Reflexhammer V2 / rubber mallet V2

EN: All instructions see: https://www.printables.com/model/1302465-reflexhammer-rubber-mallet DE: Alle Unterlagen / Anweisungen siehe: https://www.printables.com/model/1302465-reflexhammer-rubber-mallet

Order a print of this model

Printables

Combination square and double square holder, Mallet holder for 3/4 french cleat

This holder construct from FreenchCleatBase and CombinationSquareHolder. HolderBase is for customizing. You can customize whatever you want. It may be tight to slide in the holder to the base. I recommend to tap lightly with a rubber or…

Order a print of this model

Printables

Mallet

Simple hard mallet model with a sharp point on the other side, made in blender. Includes: .stl .obj .blend

Order a print of this model

Printables

Air Hockey Puck and Mallet

A simple Air hockey puck and mallet. Includes- STL, OBJ, 3MF, and F3D file types for both models. The freedom to print, sell, and distribute any amount of the model for commercial purposes (as long as attribution is given). POINTERS for…

Order a print of this model

Printables

Multiboard Hammer Mount (including larger one for Mallet)

Multiboard hammer mounts (regular size and mallet size). Use tree support from the build plate. Reccomend using 3 walls. Also recommend using a multipoint bolt and the heavy duty (hooked) snap.

Order a print of this model

Printables

Wall Control Mallet Holder

I made this mallet holder using a centerpiece by Luma specific to their wide array of control designs. You just need a right and left bracket, attach it to this piece and you're good to go.

Order a print of this model

Printables

Rubber Mallet Holder for Skadis IKEA

A really simple yet durable Mallet Holder for Skadis IKEA. No supper needed. three sizes available (Small, Medium, Large)

Order a print of this model

Printables

Wall Mount for Veritas Mallet/Marking Gauge

A simple wall mount for the Veritas large journeyman's mallet, held by two screws. The mallet is held by the tapered section of the head above the handle which matches up to the beveled edge on the holder. By happy coincidence the holder…

Order a print of this model

Printables

Camping Mallet

Use a density around 25% with a gyroid or triangles infill pattern(PETG). If you have PLA, try using 30%-45% density. Scale the model up by around 25% if you are an adult(or have bigger hands). Any layer height works well.

Order a print of this model

Printables

Xylophone Mallet for Kids

May need to print with a brim, depending on your bed adhesion.

Order a print of this model

Printables

Narex Mallet Holder - Wall Control

I created this friction fit Narex chisel holder for the wall control unit. All pieces to print are in one file. This is friction fit, so put the mallet in and press down and it should lock into place nicely.

Order a print of this model

Printables

Skadis Rubber Mallet Holder

Skadis peg board holder for a generic rubber mallet.

Order a print of this model

Printables

Xylophone mallet clip

As requested by a Reddit user. Inner diameter: 7.5 mm. Distance between the mallets: 7 mm.

Order a print of this model

Printables

Candy 7&11/Mallet Trail Traction Pads x 8

They make great pedals but the tractions pads are not that great. They tend to crack and falling apart in a year or two.

Order a print of this model

Printables

Small and Large Mallet holder for Multiboard / Multiconnect

Small and Large Mallet holder for Multiboard. The small holder fits mallets with a diameter up to 65mm and a handle up to 35mm wide. The large holder fits mallets with a diameter up to 78mm and a handle up to 30mm wide. Is your mallet a…

Order a print of this model

Printables

Mallet Clip for Ludwig Musser LMXYLO

This easy to print holder is designed for any xylophone mallets to conveniently clip onto the side of any 3 cm xylophone frame. Print with 10% infill grid with no supports.

Order a print of this model

Printables

Baseball Glove Mallet

There are 2 versions. One is solid, just print it and use it. Second version has an empty space in the middle for a 3/8"x8" Lag Screw. I put it into my print because they're cheap and I had one laying around. You'll have to pause the…

Order a print of this model

Printables

Mallet holder

Mallet holder Designed for every type of hammer / mallet ⚙ Features: 🔻Size : W for mallet/hammer: 30mm W part: 100mm Depth: 34mm 🔻Editable – blend. file included along stl. for remix purposes Holes made for 4mm countersink screws

Order a print of this model

Printables

RUBBER MALLET Holder | Gummihammer

Rubber mallet | Gummihammer - HOLDER (note: Can be mounted to the surface with 2 screws. And PETG ftw!)

Order a print of this model

Printables

Music Block and Mallet

Simple percussion music block for music education, includes mallet. We encourage you to experiment with the size, infill density and material types to get different and unique sounds from each print. Filament used in photos- Panchroma…

Order a print of this model

Printables

Mallet Finger Splint

Remix to work with my mallet finger issue.

Order a print of this model

Printables

Mallet Wall Mount

I remixed this mallet mount to make it stronger and and include a MALLET label. I also modified this mount to attach to Slat Wall 1U Plate A ( https://www.prusaprinters.org/prints/77915-slat-wall-1u-plate-a ). Remixed From…

Order a print of this model

Printables

Plastic Cap for Playwood PRO-3311 Timpani Mallet

I lost mine and couldn't get a replacement, so I designed my own.

Order a print of this model

Printables

Tuning Fork Mallet

My classroom needed more mallets for tuning forks, so I decided to make some. The head is made of TPU, 20% infill with at least 5 walls. The handle is made of PLA, 15% infill with at least 4 walls. The two screw together, and work pretty…

Order a print of this model

Printables

Handheld Drum Set with Mallet

A cute little set for kids education and entertainment, we printed ours in PETG but we suggest looking at a variety of materials intended for strength. Filament used in photo- Polymaker PETG in Gold and Polylite in Black PLA

Order a print of this model

Printables

Reflexhammer / Rubber mallet

Order a print of this model

Printables

Boite angle ouverte – compatible mallette Stanley FatMax (H48 mm)

Conçue pour s’insérer parfaitement dans les mallettes Stanley FatMax, cette boîte au format L (hauteur : 48 mm) permet de trier et stocker vos outils, accessoires ou visseries. Son design simple et ouvert facilite l’accès rapide au…

Order a print of this model

Printables

Boite L en coin pour mallette Stanley Fatmax – Hauteur 48 mm

Cette boîte en forme de L est spécialement conçue pour s’emboîter dans les mallettes Stanley Fatmax. Sa hauteur de 48 mm respecte les dimensions standards de la gamme pour rester compatible avec les autres modules et le couvercle de la…

Order a print of this model

Printables

Mallet finger splint - Ferula

I cut my tendon playing soccer. After 3 weeks with a regular splint and changing the tape, it didn't heal, and got worse. So I decided to immobilize the finger, hoping for a full recovery, and avoiding the temptation of: Changing the tape…

Order a print of this model

Printables

TPU Hammer Mallet Cap | Soft Cap for Hammer

Convert your steel hammer to a non-marring mallet with this Hammer Mallet Cap! Simple and clean look Durable design Fits snug on hammer I've been finding myself needing a mallet hammer on recent projects, usually to tap a 3d printed part…

Order a print of this model

Printables

Miniature Bases for BattleMallet 420C

I was asked to print a bunch of '40 mm rounds' and I figured that there would be plenty of people who have made basic models. But apparently they haven't. (in 2023 anyway) So, I created all of the ones from this person's site, assuming…

Order a print of this model

Printables

Mallet Bear Figure

Stands up well and easy to print. Great expression with mayhem clearly on the mind. I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them. See Tree supports below:

Order a print of this model

Printables

TPU Mallet

there is a slot on the handle for a 4m wood screw to fix the head in place alternatively use CA glue Recommend printing Mallet head with at least 20 percent gyroid infill high durometer tpu Handle 20 percent gyroid petg or asa

Order a print of this model

Printables

Dead blow Mallet with changable caps

I started this as a masonic gavel, but realized this can be used as a mallet for anything that I don't want to marred the surface with. Such as woodworking or assembling 3D models. The caps has a hollow center where you can put tiny ball…

Order a print of this model

Printables

Toy Xylophone Mallet

Print laying down with supports everywhere, not just touching build plate. I tried printing upright but the stick begins to move when it gets too tall. Supports: Yes Infill: 20% Filament material: PLA

Order a print of this model

Printables

Air hockey mallet and puck for small kids table

I modeled this air hockey mallet/bat/pusher and puck as a replacement for a local elementary school. They have an “air hockey table” which in reality only works with a low friction surface. I sadly forgot to take photos of the printed…

Order a print of this model

Printables

Sand toys - Mallet and Hoe

To complete, you will need a tube (preferably aluminum) with an outer diameter of 10 mm. Glue may be needed for attachment. Recommended material PETG. Use brim to print handle.

Order a print of this model

Printables

Meat tenderizer mallet

This design of the classic meat mallet combines elegance and fashion in preparing meat in a formal yet primitive way. OOOGA BOOGA!

Order a print of this model

Printables

28mm Evil Clown Demon Horns Mallet Creepy Grin Striped Outfit StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Order a print of this model

Printables

Mallet holder for french cleat system

I printed the model sideways with snug supports, tree supports gave me a bad finish so use snug standard supports.

Order a print of this model

Printables

28mm Evil Clown Demon Horns Mallet Creepy Grin Striped Outfit StarForge Kits 3D Print STL File

Order a print of this model

Printables

Bonk! Mallet

Just a fun lil mallet pls don't hit people with it thx

Order a print of this model

Printables

Soft White Mallet (Hanmmer) Mount

Soft Mallet hanger. Screw holes are made for 4mm screws with 8mm in clearance for screw head

Order a print of this model

Printables

Mallet holder

Print strong with 4 walls and 30% infill

Order a print of this model

Printables

Rubber Mallet Hanger

EN : I needed a holder for my wire rack for a rubber mallet. Here is the result. The loop on the back was designed to be deep enough to print the object in the position shown in the pictures without supports. Material : PLA Layers : 0.3mm…

Order a print of this model

Printables

Skadis Wood is Good 18oz round mallet holder

Modified one of the can holders so that it fits the 18oz round mallet from Wood is Good. With opening for easy access.

Order a print of this model

Printables

Rubber Mallet Hanger V2

EN: If you want to attach the hammer to the short side of the wire shelving rack, the wires spaced just under 3 cm apart are likely to be an obstacle to use version 1 with the wide back strap. Here is version 2 for this purpose. I printed…

Order a print of this model

Printables

009 fictional Mallet locomotive

This thing is made for a pair of TU-Koppel A chassis. Thanks to Nikolisa for making the cab: https://www.thingiverse.com/thing:7048361 WARNING THIS THING HAS NOT BEEN TEST PRINTED! Built for the Bluewater and Rounders Creek logging…

Order a print of this model

Printables

fictional 009 shorter Mallet for Kato 11-109

Inspired by a comment made by MDitch91 back on thingiverse.

Order a print of this model

Printables

Ludwig glockenspiel mallet holder

Attaches without effecting any notes, works for mallets with a head diameter of 3 eighths of an inch or 9.25mm.

Order a print of this model

Printables

Mini Mallet Hammer - Part Removal Tool

This is a very simple realistic mallet that can be used as a prop, tool or fidget toy. One of the known ways of getting parts of a PEI build sheet is with a small but swift blow with a mallet and this works a treat for this. It requires…

Order a print of this model

Printables

Mallet Holder (Wallmount)

A wall-mounted mallet holder that uses simple design to make the mallet stay in place, and the handle easy to grab! ~3mm screws should be used to mount it to the wall. The print is currently sized to accept a mallet with the width of…

Order a print of this model

Printables

Yamaha Mallet Marching Frame Bracket

This bracket goes around the 1.5" square tubing in a Yamaha Marching Frame and holds together with two 10-32 bolts. The holes allow you to hang 1/8" paracord. I use it to hang microphones.

Order a print of this model

Printables

Umbauhalterung Roco Mallet auf Glockenankermotor

Mit diesem Motorhalter können die Motoren der: Roco H0 BR 98.7, Bay. BB II, Mallet, Werklok VOEST, Vorarlberger Illwerke, Südzuckerwerke Regensburg Modelle - auf Glockenankermotor umgebaut werden Glockenankermotor 0816 passend, für die…

Order a print of this model

Printables

Mallet holder

its a thing you put onto you music stand in the percussion area to put your mallets in easier.

Order a print of this model

Printables

Universal Pegboard Hammer & Mallet Holder Set

These hammer and mallet holders are designed for pegboards with 25mm spacing but can also be easily screwed into a standard workbench wall. To screw these holders into a pegboard, please use these Pegboard Screw Adapters . Technical Data:…

Order a print of this model

Printables

Bird Bone Bike Polo Mallet head Version 004b3

Just a heavy bike polo mallet head. Be sure to anneal the PLA

Order a print of this model

Printables

Parametric TPU Hammer Mallet Cap

Order a print of this model

Printables

Small mallet

Order a print of this model

Printables

HSW-Drilling Hammer or Mallet Holder

Order a print of this model

Printables

Reflexhammer V2 / rubber mallet V2

Order a print of this model

Printables

Rubber mallet head sleeve

Rubber mallet head for a basic construction work hammer that you can get anywhere. Material Print with TPU, I used 95A Shore hardness TPU. Softer should work too but I wouldn't use anything harder than that otherwise it'll get too hard to…

Order a print of this model

Printables

Air Hockey Mallet Holder

I needed a way to store the air hockey mallets when not in use. They hook over the top of the board under the table.

Order a print of this model

Printables

"Quarter Pounder" mallet - fixed thread

The original design is very fun, but the screws for the peen side are a bit too short, and the text doesn't feel nice in the hand. So, I fixed the screw and also made a textless version. If you really love the text, you can keep it of…

Order a print of this model

Printables

Jointer Mallet Holder

Made myself a jointer mallet for my woodworking hobby, needed a holder/display to mount it on my tool wall.

Order a print of this model

Printables

Bell Mallet holder

For my sons bell mallets for band, so he doesn't keep losing them.

Order a print of this model

Printables

Bell Mallet Holder

For holding mallets

Order a print of this model

Printables

Rubber Mallet Holder openGrid

A rubber mallet holder compatible with openGrid, using a directional snap.

Order a print of this model

Printables

Mallet finger splint

Splint to immobilize the distal interphalangeal joint (DIP) of a finger in full extension to allow injured tendon to heal.

Order a print of this model

Printables

1" Mallet face

3/8-16 threads

Order a print of this model

Printables

Timpani Mallet Holder

Timpani Mallet Rack with space for 3 mallets. The design is inspired by Artifact Percussion's Mallet Rack

Order a print of this model

Printables

Mallet Winder Accessories

I have created some functional accessories and other aesthetic modifications to the awesome mallet wrapping machine! 1) Stick Head Length Guide: 40mm shaft distance. I have found this to be a nice sweet spot for my mallets. 2) Magnet…

Order a print of this model

Printables

Mallet Putter

This is a first-version center-shaft (15 degree) putter with printed grooves.

Order a print of this model

Printables

slip on mallet head for hammer

I needed a mallet for some leather working and I didn't have one, but I did have a hammer. I made this to fit over a standard 16 oz claw hammer. If you have a different size hammer you can scale up or down with your slicer. I printed it…

Order a print of this model

Printables

Customizable Air Hockey Striker/Mallet/Paddle

This is a customizable air hockey striker/mallet/paddle. The ones that were already on this site weren't the right size or shape for my kids air hockey table. The default parameters are for my kids 4' by 2' air hockey table. You can…

Order a print of this model

Printables

Pencil Mallet

Another tool to attach to the end of your pencil, or anything else similar. I find it useful to use this with a printed chisel to remove stubborn 3d prints from the bed. The chisel also can be found in my list of models. 0.2mm resolution…

Order a print of this model

Printables

Estwing Deadhead Rubber Mallet mount

Estwing Deadhead Rubber Mallet wall mount Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: Prusament PLA Jet black Category: Tools

Order a print of this model

Printables

Air Hockey Mallet

I found the original model on Thingiverse (https://www.thingiverse.com/thing:28843) created by LeftAngle, but the mallet was too small for a full sized air hockey table. I scaled it up to a standard sized mallet and set it to print with a…

Order a print of this model

Printables

rubber mallet

dead (rubber) mallet i made the head with tpu at 40% infill so that its a bit flexible and handle pla with 60% infill to give it a bit of strength . i used a drop of glue to fix head to handle .originally made for my grandkids but i liked…

Order a print of this model

Printables

Hanger for wood mallet

Hanger for wood mallet. 0.25mm layer height supports no 30% infill 4-5 perimeters filament PETG

Order a print of this model

Printables

Mallet game for children - "Daruma-inspired"

I made a fun game for my daughter. The game is inspired by the japanese toy by the name of "Daruma Otoshi". The goal of the game is to take turns and use the mallet to knock out the body pieces underneath the head without knocking over…

Order a print of this model

Printables

Glockenspiel Bells mallet stick for children

Just print two pieces and glue them together.

Order a print of this model

Printables

Ikea Skadis Rubber Mallet Hooks

Hook for a ~67mm (2.6in) diameter rubber mallet to be mounted on an Ikea Skadis board. Print 2 of these. Do as many walls as you need in order to eliminate infill. ----------------- ☕If you would like to support this kind of work, you can…

Order a print of this model

Printables

Pegboard Rubber Mallet Holder

This is a pegboard mounted rubber mallet holder. It is designed for the typical cheap 2.5" diameter head rubber mallet. It mounts to 1/4" pegboard using the plastic push rivets I uploaded to thingiverse. Print using PLA, with 25% or more…

Order a print of this model

Printables

Brass Mallet Pegboard Holder

Designed for 1/4" hole pegboards using my push rivet design. Holds brass mallets with a 3/4" diameter head and up to a .4" diameter handle shank. Print in PLA, using any infill amount desired. It will need supports under the rounded…

Order a print of this model

Printables

T-Nuts Rubber Mallet Hook for Ikea Skadis

Hook for a 60-65mm diameter ruber mallet to be mounted on Ikea Skadis board. It uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . M2 T-Nut , M2 nuts and M2 x 12mm screws are needed for mounting. The hook prints easily without…

Order a print of this model

Printables

Quarter Pounder - Extra Beefy (Hammer - Mallet)

This is a rebuild of my original Quarter Pounder ( https://www.thingiverse.com/thing:4830422 ). I found that the handle was a little wimpy and would break off the head. This is a stronger (extra beefy) version. The head can be filled with…

Order a print of this model

Printables

Hammer - Mallet - The Quarter Pounder

The inspiration for this is based on the Thwacker. Mine is weight adjustable. The small end unscrews and you can load the head with BB's, lead shot, or pennies (25 of them.... get it.... the Quarter Pounder). You can partially load the…

Order a print of this model

Printables

rubber mallet holder for ender 3 and ender 3 v2

a holder for the rubbermallet. there should be enough clearance for the mallet but the fit in the extrusion is tight. i will update whit other versions when i can but for now this is the only one. the sideholder is both squared off for…

Order a print of this model

Printables

Mallet Core

Use 5/16in or 8mm shaft

Order a print of this model

Printables

Mallet Holder for use with Remo Bongo Drums

Simple 2 piece model that creates a holder for Remo 10" LOLLIPOP DRUM Mallets on the Remo KD5400 Bongo Drums. To assemble you can either run a zip tie thru all four slots in the model or you can glue the two pieces together. Either method…

Order a print of this model

Printables

Mallet & Hammer holder for Ryobi Link

This mount allows you to hang two mallets or hammers using the Ryobi Link system. Printed at .30mm without supports using OVERTURE Grass Green PETG.

Order a print of this model

Printables

Mallet

Needed a durable Mallet for camping and diy at home. Attached are different versions of damping pads, so choose your favorite one. The head can be filled with with small lead pellets or sand etc. The pads are glued with superglue. length:…

Order a print of this model

Printables

Single piece light duty mallet

A small but handy mallet only takes 26 g of material to print. As 3d printed product is weakest at the layer adhesion, I strongly suggest you to print it horizontally such that the stem would not break easily. It will need support from…

Order a print of this model