TPU Hammer Mallet Cap | Soft Cap for Hammer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Convert your steel hammer to a non-marring mallet with this simple, durable, snap fitting Hammer Mallet Cap!
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 110
- Makes
- 3
- Views
- 321
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Convert your steel hammer to a non-marring mallet with this Hammer Mallet Cap!
- Simple and clean look
- Durable design
- Fits snug on hammer
I've been finding myself needing a mallet hammer on recent projects, usually to tap a 3d printed part into place with damaging it. I had a roll of TPU for AMS collecting dust on the shelf and decided to give a mallet cap design a go. I landed on 40% gyroid infill with 5 bottom layers. The mallet cap snaps on the hammer head holding it tight. Can be removed with a good pull & twist.
The two hammers I use are 24mm & 28mm so those are the sizes I modeled. However, the design should scale nicely if your hammer head has a similar form factor. Leave a comment if there's a form factor (head diameter and throat length) that isn't working and I'll look at adding it.
Note: This is designed to be printed in TPU. I recommend TPU HF 95a or TPU for AMS