Denture Bit Holder (28 Bit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Steel dentures.
- Ocena
- 4,875 / 5
- Polubienia
- 737
- Pobrania
- 1305
- Wydruki
- 6
- Wyświetlenia
- 9400
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Standard Digital File License
Denture Bit Holder (28 Bits) – Print in PlaceA fun, functional, and striking bit organizer shaped like a set of dentures! Designed to hold up to 28 standard bits, this holder opens and closes smoothly using a Print-in-Place hinge (no assembly required for the joint, it prints all in one piece!).
Key Features:Capacity: Holds up to 28 bits (14 top, 14 bottom).
Print-in-Place: No complex joint assembly needed, ready right off the build plate!
Magnetic Retention: Magnet pockets keep both the case closed and your bits securely in place.
Hardware Required:To complete the model, you will need:
2x 10x3 mm Magnets (for the main hinge / closure)
28x 4x1.5 mm Magnets (inserted into each bit slot for secure hold)
Recommended Print Settings:Supports: No supports needed
Layer Height: 0.20 mm
Infill: 15–20%
Material: PLA or PETG
If you like this model, please leave a Like 🧡 and upload a picture of your print! Happy printing!
