SKÅDIS holder for Xiaomi MIAOMIAOCE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SKÅDIS holder for Xiaomi MIAOMIAOCE thermometer-hygrometer, displaying temperature and humidity.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Xiaomi MIAOMIAOCE Thermometer-Hygrometer Holder for IKEA SKÅDIS
This holder is designed for the Xiaomi MIAOMIAOCE thermometer-hygrometer, displaying temperature and humidity.
It allows the device to be mounted directly onto an IKEA SKÅDIS pegboard, keeping the screen clearly visible while remaining easy to remove when needed.
Designed for
Xiaomi MIAOMIAOCE thermometer-hygrometer
Internal width: 65 mm
Internal thickness: 9.5 mm
IKEA SKÅDIS pegboard mounting
Three rear mounting clips
Rear clip width: 3.8 mm each
The three rear clips retain their original position and spacing to ensure correct alignment with the SKÅDIS pegboard holes.
Printing recommendations
Material: PLA or PETG
Layer height: 0.2 mm
3 or more perimeters
15–25% infill
No supports should normally be required, depending on the chosen printing orientation
Notes
The holder is designed to keep the thermometer-hygrometer securely in place while allowing it to be removed easily.
Depending on your printer calibration and material shrinkage, the fit may be slightly tighter or looser.
Created by Kevin Thenard
http://kevin.thenard.fr