1 / 4
Dual Antenna Mount (ELRS T-Antenna & HDZero U.FL) - Source One V6 — zdjęcie 1
1 / 4

Dual Antenna Mount (ELRS T-Antenna & HDZero U.FL) - Source One V6

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounts both ELRS T antenna and the UFL HDZero antenna to a Source One V6 frame. Should fit any 22mm-spaced frame.

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
91
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Keep your FPV build clean and your antennas secure with this integrated dual-antenna mount. Designed specifically for the TBS Source One V6 frame, this single TPU print holds both your ELRS T-antenna and your HDZero U.FL video antenna safely out of the prop line.

While designed for the Source One V6, this mount is versatile and will fit any frame with 22mm standoff spacing at the rear. I might be able to make minor changes for your needs, please let me know. 

Heads up: This print can be challenging. Because of the protruding antenna stalk and the nature of flexible filaments, you will need well-tuned overhang and support settings.


Printing: TPU, 100% infill. You must use supports for the extended antenna stick. Tree supports (or organic supports) are highly recommended here to save material and make removal easier. If possible, use PLA as a support material.

Assembly Notes: Feed the HDZero antenna through the center stalk first pushing the connector through using a hex or round shaped object (not pointy !). Seat the ELRS T-antenna into its holes, by bending both wires and really flexing the TPU. Fit is really snug, this is intentional. 

Happy flying!

Tagi