INDX Upgrade Hardware Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nut and bolt organizer to hold the hardware reused from the Core One and the new hardware provided in the kit.
- Ocena
- 5 / 5
- Polubienia
- 113
- Pobrania
- 556
- Wydruki
- 24
- Wyświetlenia
- 2523
- Oceny
- 25
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wasn't able to use the highly regarded screw organizers for the core one when I built mine, and looked for something similar for the INDX upgrade. I noticed there are two separate models (one for INDX kit hardware @wubbr, and one for the hardware you keep while disassembling your Core One @M3ro_2382879 ), but I wanted a combined version that could be printed all at once. It's not perfect, but it should do the trick. It has curved edges to reduce the corners lifting during printing, and a nice fillet in each compartment to help scooping out the parts with gummy bear fingers.
Note that I have yet to perform my INDX upgrade, so this model is based off of the sizing and hardware listed from the models I linked for remixing. I have uploaded a STL, 3MF, and OBJ files so please, take and make edits as you see fit.
This model has unique slots for each type of hardware used and keeps new / used hardware separate as well.
My Print Settings:
Nozzle: 0.4mm
Layer Height: 0.2mm
Profile: 0.2 Balanced
Filament: Polymaker Matte PLA (Army Dark Green) and Overture Matte Black
15% infill